Jump to content

Lenovo Vibe K5 (lenovo-a6020a40)

From postmarketOS Wiki
Revision as of 08:08, 26 April 2023 by Illen (talk | contribs)
Lenovo Vibe K5
Lenovo Vibe K5 running Plasma Mobile
Lenovo Vibe K5 running Plasma Mobile
Manufacturer Lenovo
Name Vibe K5
Codename lenovo-a6020a40
Released 2016
Hardware
Chipset Qualcomm Snapdragon 415 (MSM8929)
CPU Octa-core (4x1.1 GHz Cortex-A53 & 4x1.4 GHz Cortex-A53)
GPU Adreno 405
Display 720x1280 IPS
Storage 16 GB
Memory 2 GB
Architecture aarch64
Software
Original software Android 5.1
postmarketOS
Category testing
Pre-built images no
Mainline yes
Features
Flashing
Works
USB Networking
Works
Internal storage
No data
SD card
No data
Battery
Partial
Screen
Works
Touchscreen
Works
Multimedia
3D Acceleration
Works
Audio
Broken
Camera
Broken
Camera Flash
Works
Connectivity
WiFi
Works
Bluetooth
Works
GPS
No data
Modem
Calls
Works
SMS
Works
Mobile data
Works
Miscellaneous
FDE
No data
USB OTG
No data
Sensors
Accelerometer
Works
Magnetometer
Broken
Ambient Light
Broken
Proximity
Broken
Haptics
Works
Power Sensor
Partial


Contributors

Users owning this device

  • Illen (Notes: touchscreen/panel slightly damaged)


How to enter flash mode

Power + vol-

Installation

  • Build and flash lk2nd
  • Enter lk2nd menu (boot the phone and then press vol- after first vibration)
  • Run pmbootstrap flasher flash_rootfs --partition userdata and reboot after it's complete

Audio

Audio mostly works (including calls), although it is enabled only in testing fork due to few problems.

Battery charging and USB OTG

The charger driver is not implemented, meaning that the device might not be able to charge the battery in some cases (and certainly won't indicate that it is charging) and USB OTG devices might work only with external power supply when running the mainline kernel .

See also