Jump to content

Xiaomi Mi TV Stick (xiaomi-aquaman)

From postmarketOS Wiki
Revision as of 11:18, 20 May 2023 by Knuxify (talk | contribs) (Created page with "{{Infobox device | manufacturer = Xiaomi | name = Mi TV Stick | codename = xiaomi-aquaman | image = File:xiaomi-aquaman.jpg | releaseyear = 2020 | originalsoftware = Android T...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
This device is marked as not booting.
Status: Didn't make a port yet
Xiaomi Mi TV Stick
Manufacturer Xiaomi
Name Mi TV Stick
Codename xiaomi-aquaman
Released 2020
Hardware
Chipset Amlogic S805Y
CPU Quad-core 1.2 GHz Cortex-A53
GPU ARM Mali-450
Display -
Storage 8GB
Memory 1GB
Software
Original software Android TV
Original version 9
Extended version 11
postmarketOS
Category testing
Pre-built images no


Contributors

Users owning this device

  • 19atlas (Notes: 1080p green version, No go command, edited bootcmd)
  • Exkc
  • FerassElHafidi (Notes: Green 3rd variant. Ran Android 10. Wiped eMMC, boots Mainline U-Boot as BL33)
  • Knuxify (Notes: 2x; one works (blue variant), one has random shutdowns which seem to be caused by it overheating, since it works fine with the top of the casing taken off (green variant). Both running Android 9)
  • Mertoalex (Notes: family uses it, I debloated it with UAD-ng.)


How to enter flash mode

Hold down the OK+Back keys on the remote while booting to boot into recovery. There's an option there to reboot to the bootloader.

TODO TODO: How to flash this device? Does the bootloader reboot button do anything? Looks like the primary way to flash things is through UART ports on the PCB...