Xiaomi Mi TV Stick (xiaomi-aquaman)
Appearance
This device is marked as not booting.
Status: Didn't make a port yet
Status: Didn't make a port yet
![]() | |
Manufacturer | Xiaomi |
---|---|
Name | Mi TV Stick |
Codename | xiaomi-aquaman |
Released | 2020 |
Hardware | |
Chipset | Amlogic S805Y |
CPU | Quad-core 1.2 GHz Cortex-A53 |
GPU | ARM Mali-450 |
Display | Up to 1080p over HDMI |
Storage | 8GB |
Memory | 1GB |
Architecture | aarch64 |
Software | |
Original software | Android TV |
Original version | 9 |
postmarketOS | |
Category | testing |
Pre-built images | no |
Contributors
Users owning this device
- 19atlas (Notes: 1080p green version, No go command, edited bootcmd)
- Exkc
- FerassElHafidi (Notes: Green 3rd variant. Ran Android 10. Wiped eMMC, boots Mainline U-Boot as BL33)
- Knuxify (Notes: 2x; one works (blue variant), one has random shutdowns which seem to be caused by it overheating, since it works fine with the top of the casing taken off (green variant). Both running Android 9)
- Mertoalex (Notes: family uses it, I debloated it with UAD-ng.)
How to enter recovery mode
Hold down the OK+Back keys on the remote while booting to boot into recovery.
How to flash the device
Xiaomi Mi TV Stick has only android 9 and there are few version of android 9 firmware for it.Some android 9 fireware has uboot that will give you shell via.However the uboot seem to only allow signed kernel to boot when it isnt unlocked.
(I found some YouTube video that goes over the process of installing Armbian, sadly it's all in Russian but it's easy enough to understand if you turn on auto-translated subtitles. It should be possible to do a similar thing with pmOS.)