Xiaomi Mi TV Stick (xiaomi-aquaman)
Appearance
This device is marked as not booting.
Status: Didn't make a port yet
Status: Didn't make a port yet
![]() | |
Manufacturer | Xiaomi |
---|---|
Name | Mi TV Stick |
Codename | xiaomi-aquaman |
Released | 2020 |
Hardware | |
Chipset | Amlogic S805Y |
CPU | Quad-core 1.2 GHz Cortex-A53 |
GPU | ARM Mali-450 |
Display | Up to 1080p over HDMI |
Storage | 8GB |
Memory | 1GB |
Architecture | aarch64 |
Software | |
Original software | Android TV |
Original version | 9 |
postmarketOS | |
Category | testing |
Pre-built images | no |
Contributors
Users owning this device
- 19atlas (Notes: 1080p green version, No go command, edited bootcmd)
- Exkc
- FerassElHafidi (Notes: Green 3rd variant. Ran Android 10. Wiped eMMC, boots Mainline U-Boot as BL33)
- Knuxify (Notes: 2x; one works (blue variant), one has random shutdowns which seem to be caused by it overheating, since it works fine with the top of the casing taken off (green variant). Both running Android 9)
- Mertoalex (Notes: family uses it, I debloated it with UAD-ng.)
How to enter recovery mode
Hold down the OK+Back keys on the remote while booting to boot into recovery.
or
How to enter fastboot
0. plug to the pc
1. enable devloader mode in setting
2. adb reboot recovery
How to enter fastboot
0. plug to the pc
1. enable devloader mode in setting
2. adb reboot fastboot
How to downgrade to older version of android 9
see also
[armbian booting on Xiaomi Mi TV Stick via chain load uboot]
Xiaomi_Mi_Box_3_(xiaomi-once) like Xiaomi Mi TV Stick the uboot in older firmware has a uboot that has a shell that allow boot pm os from chainbooted uboot but the newer fireware dont have a bl that has a shell