Jump to content

Tolino Page 2 (tolino-page2)

From postmarketOS Wiki
Revision as of 04:57, 2 September 2024 by User0 (talk | contribs) (Contributors)
tolino tolino page 2
Tolino Page 2 with booted PostmarketOS
Tolino Page 2 with booted PostmarketOS
Manufacturer tolino
Name tolino page 2
Codename tolino-page2
Released 2017
Type tablet
Hardware
Chipset Freescale_i.MX6
CPU 1x ARM Cortex-A9
GPU PXP (2D only)
Storage 512 MB
Memory Depends on installed SD card
Architecture armv7
Software
Original software Android
Original version 4.4.2 (modified)
postmarketOS
Category testing
Pre-built images no
Mainline yes
postmarketOS kernel 6.8.8
Unixbench Whet/Dhry score Not filled yet
Features
Flashing
Works
USB Networking
Works
Internal storage
Works
SD card
No data
Battery
Partial
Screen
Broken
Touchscreen
Broken
Keyboard
No data
Touchpad
No data
Stylus
No data
Multimedia
3D Acceleration
Broken
Built-in DVB
No data
Audio
Broken
Camera
Broken
Camera Flash
No data
IR TX
No data
IR RX
No data
Connectivity
WiFi
Works
Bluetooth
Broken
Ethernet
No data
GPS
Broken
NFC
Broken
Modem
Calls
Broken
SMS
Broken
Mobile data
Broken
Miscellaneous
FDE
Broken
USB-A
No data
USB OTG
Broken
HDMI/DP
No data
Sensors
Accelerometer
Broken
Magnetometer
Broken
Ambient Light
Broken
Proximity
Broken
Hall Effect
Broken
Haptics
No data
Barometer
Broken
Power Sensor
Broken


Contributors

  • User0

Users owning this device

  • User0 (Notes: running stock ROM)


How to enter flash mode

Installation

Disassemble the device by removing the back cover. Insert the internal SD Card into a SD Card reader, and connect it to your PC. Follow the instructions below to flash postmarketOS to the SD card:

Use pmbootstrap to build your own installation image.

$ pmbootstrap init
$ pmbootstrap install --sdcard /dev/[sdcard]

After that reassemble the device, by reconnecting the internal SD card and closing the back cover. SSH over USB works by using

$ ssh username@172.16.42.1

Connect to WiFi with

$ sudo nmtui

Currently graphics are entirely broken.

See also