Tolino Page 2 (tolino-page2)
Appearance
![]() Tolino Page 2 with booted PostmarketOS | |
Manufacturer | tolino |
---|---|
Name | tolino page 2 |
Codename | tolino-page2 |
Released | 2017 |
Type | tablet |
Hardware | |
Chipset | Freescale_i.MX6 |
CPU | 1x ARM Cortex-A9 |
GPU | PXP (2D only) |
Storage | 512 MB |
Memory | Depends on installed SD card |
Architecture | armv7 |
Software | |
Original software | Android |
Original version | 4.4.2 (modified) |
postmarketOS | |
Category | testing |
Pre-built images | no |
Mainline | yes |
postmarketOS kernel | 6.8.8 |
Unixbench Whet/Dhry score | Not filled yet |
Flashing |
Works |
---|---|
USB Networking |
Works |
Internal storage |
Works |
SD card |
No data |
Battery |
Partial |
Screen |
Broken |
Touchscreen |
Broken |
Keyboard |
No data |
Touchpad |
No data |
Stylus |
No data |
Multimedia | |
3D Acceleration |
Broken |
Built-in DVB |
No data |
Camera Flash |
No data |
IR TX |
No data |
IR RX |
No data |
Connectivity | |
WiFi |
Works |
Ethernet |
No data |
Miscellaneous | |
FDE |
Broken |
USB-A |
No data |
HDMI/DP |
No data |
Haptics |
No data |
Contributors
Users owning this device
- User0 (Notes: running stock ROM)
How to enter flash mode
There is no flash mode to flash pmOS, follow the instructions below to flash pmOS to the internal SD card.
Installation
Disassemble the device by removing the back cover. Insert the internal SD Card into a SD Card reader, and connect it to your PC. Follow the instructions below to flash postmarketOS to the SD card:
Use pmbootstrap to build your own installation image.
$ pmbootstrap init
$ pmbootstrap install --sdcard /dev/[sdcard]
After that reassemble the device, by reconnecting the internal SD card and closing the back cover. SSH over USB works by using
$ ssh username@172.16.42.1
Connect to WiFi with
$ sudo nmtui
Currently graphics are entirely broken.
See also
- pmaports!5542 Initial merge request