Samsung Galaxy A51 (samsung-a51)
Appearance
CHANGE_ME CHANGE_ME | |
Manufacturer | Samsung |
---|---|
Name | Galaxy A51 |
Codename | samsung-a51 |
Model | SM-A515 |
Released | 2019 |
Type | handset |
Hardware | |
Chipset | Samsung Exynos 9611 |
CPU | 4x 2.3 GHz Cortex-A73 & 4x 1.7 GHz Cortex-A53 |
GPU | Mali-G72 |
Display | CHANGE_ME |
Storage | CHANGE_ME |
Memory | CHANGE_ME |
Architecture | aarch64 |
Software | |
Original software | Android |
Original version | 13 |
postmarketOS | |
Category | testing |
Pre-built images | no |
postmarketOS kernel | 4.14.113 |
Unixbench Whet/Dhry score | 0.0 |
Flashing |
Partial |
---|---|
USB Networking |
Broken |
Internal storage |
Works |
SD card |
No data |
Battery |
Works |
Screen |
Works |
Touchscreen |
Works |
Multimedia | |
3D Acceleration |
No data |
Built-in DVB |
No data |
Audio |
No data |
Camera |
No data |
Camera Flash |
No data |
Connectivity | |
WiFi |
Broken |
Bluetooth |
No data |
Ethernet |
No data |
GPS |
No data |
NFC |
No data |
Modem | |
Calls |
No data |
SMS |
No data |
Mobile data |
No data |
Miscellaneous | |
FDE |
No data |
USB-A |
No data |
USB OTG |
No data |
HDMI/DP |
No data |
Sensors | |
Accelerometer |
No data |
Magnetometer |
No data |
Ambient Light |
No data |
Proximity |
No data |
Hall Effect |
No data |
Haptics |
No data |
Barometer |
No data |
Power Sensor |
No data |
Contributors
- manoedinata
Users owning this device
- Manoedinata (Notes: Screen replaced.)
- SeMi2309
How to enter recovery/Odin mode
- Press and hold + simultaneously while device is powered off, then plug USB cable in for Odin mode.
- Press and hold + + simultaneously while device is powered off for recovery mode.
- Press and hold + simultaneously for 7-8 seconds while device is powered on to force reboot. Once time is up immediately release the keys and press one of combinations above before boot logo appears, otherwise device will boot normally.
Installation
Use pmbootstrap to build your own installation image.
Heimdall installation is untested. Use Installation_from_recovery_mode instead.