Jump to content

Xiaomi Redmi Note 11 (xiaomi-spes)

From postmarketOS Wiki
Revision as of 15:59, 7 April 2025 by Omar mahboubi (talk | contribs) (Created page with "{{Infobox device | manufacturer = Xiaomi | name = Redmi Note 11 | codename = xiaomi-spes | model = 2201117TG, 2201117TI, 2201117TY, 2201117TL | image = File:CHANGE_ME_TO_DEVICE_CODENAME.jpg | imagecaption = CHANGE_ME | releaseyear = 2021 | category = testing | originalsoftware = Android | originalversion = 11 | pmoskernel = 4.19.322 | chipset = Qualcomm Snapdragon 680 (SM6225) | cpu = 4x2.4 GHz Kryo 265 Gold & 4x1.9 GHz Kryo 265 Silver | gpu = Adreno 610 | display = 1080...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Xiaomi Redmi Note 11
CHANGE_ME
CHANGE_ME
Manufacturer Xiaomi
Name Redmi Note 11
Codename xiaomi-spes
Model 2201117TG, 2201117TI, 2201117TY, 2201117TL
Released 2021
Type handset
Hardware
Chipset Qualcomm Snapdragon 680 (SM6225)
CPU 4x2.4 GHz Kryo 265 Gold
4x1.9 GHz Kryo 265 Silver
GPU Adreno 610
Display 1080x2400 AMOLED, 90Hz
Storage 64 GB, 128 GB
Memory 4 GB, 6 GB
Architecture aarch64
Software
Original software Android
Original version 11
FOSS bootloader yes
postmarketOS
Category testing
Pre-built images no
postmarketOS kernel 4.19.322
Features
Flashing
Works
USB Networking
Partial
Internal storage
No data
SD card
No data
Battery
No data
Screen
No data
Touchscreen
No data
Multimedia
3D Acceleration
No data
Audio
No data
Camera
No data
Camera Flash
No data
Connectivity
WiFi
No data
Bluetooth
No data
GPS
No data
Modem
Calls
No data
SMS
No data
Mobile data
No data
Miscellaneous
FDE
No data
USB OTG
No data
Sensors
Accelerometer
No data
Ambient Light
No data
Proximity
No data
Haptics
No data


Contributors

  • Omar mahboubi

Users owning this device

  • Seebz (Notes: custom rom, no battery)


How to enter flash mode

Installation

Using pmbootstrap

Follow Installation/Using pmbootstrap. When asked for the device's vendor/codename, select FIXME as the vendor and FIXME as the codename.

To flash the image to the device:

  • Enter flashing mode (see #How to enter flash mode)
  • Run pmbootstrap export, then use aik-unpack to unpack the boot.img, replace the header version from 0 to 3, run <aik-repack> then flash the newly made image with fastboot flash boot yourimage.img
  • Run pmbootstrap flasher flash_rootfs


See also