Difference between revisions of "ASUS Transformer Prime (asus-tf201)"

From postmarketOS
Jump to: navigation, search
Line 49: Line 49:
 
== Status ==
 
== Status ==
 
* Kernel compiles
 
* Kernel compiles
* Flashable from within recovery (same as [[Asus_Eee_Pad_Transformer_Prime]])
+
* Flashable from within recovery (same as [[ASUS_Eee_Pad_Transformer_(asus-tf101)]])
 
* Doesn't go beyond bootlogo
 
* Doesn't go beyond bootlogo
 
* Having problems compiling with APANIC flag (to read last_kmesg - and figure out why)  
 
* Having problems compiling with APANIC flag (to read last_kmesg - and figure out why)  
Line 57: Line 57:
  
 
== Installation ==
 
== Installation ==
<!-- add more sections below as necessary, e.g. Wifi, photos, ... -->
+
You need to be running Katkiss 7.1 (with TWRP 3.0.0 and hairy bean bootloader)
 +
 
 +
# <pre>./pmbootstrap.py install --no-fde</pre>
 +
# <pre>./pmbootstrap.py export</pre>
 +
# Reboot the device in recovery
 +
# <pre>adb push /tmp/postmarketOS-export/blob-asus-tf201 /cache</pre>
 +
# <pre>adb push /tmp/postmarketOS-export/asus-tf201.img /cache</pre>
 +
 
 +
The following should be executed within adb shell:
 +
 
 +
# <pre>adb shell</pre>
 +
# <pre>dd if=/cache/blob-asus-tf201 of=/dev/block/mmcblk0p4</pre>
 +
# <pre>dd if=/cache/asus-tf201.img of=/dev/block/mmcblk0p1</pre>
 +
 
 +
Note: Other ways of flashing do not work. This is exactly how the katkiss android ROM is flashed to the device.
  
 
== See also ==
 
== See also ==

Revision as of 13:39, 11 December 2018

Asus Eee Pad Transformer Prime
200px
Picture: Todo
Manufacturer Asus
Name Eee Pad Transformer Prime
Codename tf201
Released 2011
Category testing
Original software Android 3.2
Hardware
Chipset Nvidia Tegra 3
CPU 1.3 GHz quad-core Nvidia Tegra 3 T30
GPU GeForce ULP
Display 1200x800 LED
Storage 32 GB
Memory 1GB
Architecture armhf
Features
USB Networking
Flashing
Touchscreen
Display
WiFi
Xwayland
FDE
Mainline
Battery
3D Acceleration
Accelerometer
Audio
Bluetooth
Camera
GPS
Mobile data
SMS
Calls
USB OTG



Contributors

  • rogier.oudshoorn

Maintainer(s)

Based on

Katkiss 7.1

Status

  • Kernel compiles
  • Flashable from within recovery (same as ASUS_Eee_Pad_Transformer_(asus-tf101))
  • Doesn't go beyond bootlogo
  • Having problems compiling with APANIC flag (to read last_kmesg - and figure out why)

How to enter flash mode

Longpress power (for reboot), then lower sound (to bootloader), and from bootloader higher sound to jump to recovery

Installation

You need to be running Katkiss 7.1 (with TWRP 3.0.0 and hairy bean bootloader)

  1. ./pmbootstrap.py install --no-fde
  2. ./pmbootstrap.py export
  3. Reboot the device in recovery
  4. adb push /tmp/postmarketOS-export/blob-asus-tf201 /cache
  5. adb push /tmp/postmarketOS-export/asus-tf201.img /cache

The following should be executed within adb shell:

  1. adb shell
  2. dd if=/cache/blob-asus-tf201 of=/dev/block/mmcblk0p4
  3. dd if=/cache/asus-tf201.img of=/dev/block/mmcblk0p1

Note: Other ways of flashing do not work. This is exactly how the katkiss android ROM is flashed to the device.

See also