Alcatel Idol 3 5.5" (alcatel-idol3)
Jump to navigation
Jump to search
200px Alcatel Idol 3 (5.5") | |
Manufacturer | Alcatel |
---|---|
Name | Idol 3 (5.5") |
Codename | alcatel-idol3 |
Released | 2015 |
Category | testing |
Original software | Android 5.0.2 |
postmarketOS kernel | Mainline |
Hardware | |
Chipset | Qualcomm MSM8939 Snapdragon 615 |
CPU | Octa-core (4x1.5 GHz Cortex-A53 & 4x1.0 GHz Cortex-A53) |
GPU | Adreno 405 |
Display | 1080 x 1920 IPS LCD |
Storage | 16GB / 32GB |
Memory | 2 GB |
Architecture | aarch64 |
USB Networking |
Works |
---|---|
Flashing |
Works |
Touchscreen |
Works |
Display |
Works |
WiFi |
Works |
FDE |
Works |
Mainline |
Works |
Battery |
Works |
3D Acceleration |
Works |
Audio |
Works |
Bluetooth |
Works |
Camera | |
GPS |
Works |
Mobile data |
Works |
SMS |
Works |
Calls |
Works |
USB OTG | |
NFC | |
Accelerometer |
Works |
---|---|
Magnetometer | |
Ambient Light | |
Proximity | |
Hall Effect | |
Barometer | |
Power Sensor | |
Camera Flash | |
---|---|
Keyboard | |
Touchpad | |
USB-A | |
HDMI/DP | |
Ir TX | |
Ir RX | |
Stylus | |
Haptics | |
Ethernet | |
FOSS bootloader | |
This device is based on the Snapdragon 615. See the SoC page for common tips, guides and troubleshooting steps |
Contents
Contributors
Maintainer(s)
Users owning this device
How to enter flash mode
- Recovery: Power on the device with both Power and Volume Up buttons.
- Fastboot: Power on the device with both Power and Volume Down buttons.
Stock fastboot was removed on update from Android 5/Lollipop to 6/MarshMallow.
Installing lk2nd is required to run mainline kernel anyway.
Installation
- Install lk2nd (alternative bootloader that provides a standard fastboot interface) to boot partition using either:
- Alcatel Flasher tool
- emmcdl with Idol35_5_NPRG7627.bin or edl.py
- dd command from TWRP
- Follow Qualcomm_Snapdragon_410/412_(MSM8916)#Installation.
Touchscreen
There are two touchscreen variants:
- edt-ft5x06
- synaptics / rmi4
Currently, only the edt-ft5x06 one is enabled.
If you have the Synaptics one, you'll have to edit the DTS file to disable edt-ft5x06 and enable synaptics, then rebuild the kernel package.
This shall be solved in lk2nd in the future.
See also
- pmaports!2902 Initial merge request
- Device package