F(x)tec Pro1X (fxtec-qx1050)
🚧 | This page is a work-in-progress. Some information contained within may be inaccurate or incomplete. |
![]() F(x)tec Pro1X running Android with split screen multitasking | |
Manufacturer | F(x)tec |
---|---|
Name | Pro1X |
Codename | fxtec-qx1050 |
Released | 2022 |
Category | testing |
Original software | Android 11/LineageOS/Ubuntu Touch |
Hardware | |
Chipset | Qualcomm Snapdragon 662 (SM6115) |
CPU | 4x Kryo 260 Gold @ 2.0 GHz + 4x Kryo 260 Silver @ 1.8 GHz |
GPU | Adreno 610 |
Display | 5.99″ 1080x2160 AMOLED |
Storage | 128GB/256GB |
Memory | 6GB/8GB LPDDR4 |
Architecture | aarch64 |
This device is marked as not booting.
USB Networking | |
---|---|
Flashing | |
Touchscreen | |
Display | |
WiFi | |
FDE | |
Mainline | |
Battery | |
3D Acceleration | |
Audio | |
Bluetooth | |
Camera | |
GPS | |
Mobile data | |
SMS | |
Calls | |
USB OTG | |
NFC | |
Accelerometer | |
---|---|
Magnetometer | |
Ambient Light | |
Proximity | |
Hall Effect | |
Barometer | |
Power Sensor | |
Camera Flash | |
---|---|
Keyboard | |
Touchpad | |
USB-A | |
HDMI/DP | |
Ir TX | |
Ir RX | |
Stylus | |
Haptics | |
Ethernet | |
FOSS bootloader | |
Contributors
Users owning this device
How to enter flash mode
Fastboot
Hold down Power and Volume Down while the device is off until you're in fastboot mode.
Recovery
Hold down Power and Volume Up while the device is off until you're in recovery mode.
EDL
Bootloader
Hold down Volume Up and Volume Down and plug in the USB cable while the device is off. The device should now be in QDL mode.
Deep Flash Cable
If your bootloader is corrupted, the deep flash cable can be used to reflash the bootloader or other part of the device.