Huawei Watch (huawei-sturgeon)

From postmarketOS
Revision as of 10:27, 28 December 2022 by SoySoy (talk | contribs) (type = watch)
Jump to navigation Jump to search
Huawei Watch
Huawei Watch running the weston demo
Huawei Watch running the weston demo
Manufacturer Huawei
Name Watch
Codename huawei-sturgeon
Released 2015
Category testing
Original software Android Wear
postmarketOS kernel 3.10.40
Hardware
Chipset Qualcomm Snapdragon 400 (APQ8026)
CPU Quad-core 1.2 GHz Cortex-A7
GPU Adreno 305
Display 400x400 AMOLED
Storage 4 GB
Memory 512 MB
Architecture armv7
Type watch
Features
USB Networking
Works
Flashing
Works
Touchscreen
Works
Display
Works
WiFi
Works
FDE
Mainline
Battery
3D Acceleration
Audio
Bluetooth
Camera
GPS
Mobile data
SMS
Calls
USB OTG
NFC
Sensors
Accelerometer
Magnetometer
Ambient Light
Proximity
Hall Effect
Barometer
Power Sensor
Misc
Camera Flash
Keyboard
Touchpad
USB-A
HDMI/DP
Ir TX
Ir RX
Stylus
Haptics
Ethernet
FOSS bootloader




Contributors

  • Timbz

Users owning this device


How to enter Fastboot mode

  1. Hold down the power button.
  2. The watch will reboot, keep holding the power button.
  3. Wait for the first vibration, release the power button and then immediately tab it again.

Installation

First build the image:

$ pmbootstrap init
$ pmbootstrap install

Then in order to flash it put your device in fastboot mode, and put it on the dock. Then do:

$ pmbootstrap flasher flash_rootfs
$ pmbootstrap flasher flash_kernel

You can then either reboot or run fastboot continue to boot into postmarketOS.


Fastboot OEM-specific commands

fastboot oem unlock
fastboot oem lock
fastboot oem unlock_critical
fastboot oem lock_critical
fastboot oem device-info
fastboot oem enable-charger-screen
fastboot oem disable-charger-screen
fastboot oem select-display-panel
fastboot oem get-build-number
fastboot oem get-oem-version
fastboot oem shutdown

See also