Jolla Phone (jolla-sbj)
|Original software||Sailfish 1|
|Chipset||Qualcomm Snapdragon 400|
|CPU||Dual-core 1.4 GHz Krait 300|
- Compiling the kernel from the Jolla sources which should provide everything to run Wayland since that's what Sailfish uses
- SSH (after some manual configuration)
The Jolla phone uses fastboot from the Mer project rather than Android. To enter fastboot shut down the device, then plug in the USB lead while holding down volume down.
The USB connection works, but needs some manual configuration (as found here).
First, find the interface name using
Then, we have to assign the device a mac address (replace the interface name with what you found from the previous command).
# ip l set enp1s0f0u3: address 12:12:12:12:12:12
Lastly, add an IP address.
# ip address add dev enp1s0f0u3 172.16.42.2/24
You can now use SSH to connect to the device on