Open main menu
LG Optimus L5
LG Optimus L5
LG Optimus L5
Manufacturer LG
Name Optimus L5
Codename lg-e610
Released 2012
Category testing
Original software Android 4.0.3
postmarketOS kernel 3.4.0
Hardware
Chipset Qualcomm Snapdragon S1 (MSM7225A)
CPU 800 MHz Cortex-A5
GPU Adreno 200
Display 320x480
Storage 4 GB
Memory 512 MB
Architecture armv7
Features
USB Networking
Works
Flashing
Works
Touchscreen
Display
Partial
WiFi
FDE
Mainline
Battery
3D Acceleration
Audio
Bluetooth
Camera
GPS
Mobile data
SMS
Calls
USB OTG / USB-C Role switching
NFC
Sensors
Accelerometer
Magnetometer
Ambient Light
Proximity
Hall Effect
Barometer
Power Sensor
Misc
Keyboard
Touchpad
USB-A
HDMI/DP
Ir TX
FOSS bootloader



Contributors

  • Nimayer

Maintainer(s)

  • Nimayer

Users owning this device

  • J.r (Notes: Currently unused, will maybe play around with PmOS on it some day)
  • Nimayer (Notes: pmOS port author)
  • Zekiu (Notes: vendor: "plus")


How to enter flash mode

From off state, press and hold Volume UP + Power + Home, then release Power and hold the other two.

The phone will stay on the LG logo and show a black log screen once you connect the USB cable.

Internal memory Installation

Flashing via fastboot does not work, both commands

 $ pmbootstrap flasher flash_rootfs
 $ pmbootstrap flasher flash_rootfs --partition userdata

Fail with:

 [12:50:20] (native) flash rootfs image
 target didn't report max-download-size
 Sending 'userdata' (464896 KB)...
 FAILED (remote: data too large)

You can flash by recovery zip or SD card.

SD card Installation

- Build image (on your computer) and prepare the installation as usual

 $ pmbootstrap init
 $ pmbootstrap build device-lg-e610
 $ pmbootstrap install --sdcard=/dev/mmcblk0

- Put the phone in Fastboot mode and connect it to your computer

 $ pmbootstrap flasher flash_kernel 

See also