Mainlining is the process of replacing the kernel provided by the device vendor (the "downstream" kernel), with a version close to the actively developed version released on kernel.org (the "mainline" kernel). It involves porting (and most importantly: cleaning up) device-specific code from the downstream kernel to the mainline kernel. For some SoCs, common support already exists in mainline, so you can focus on device-specific components.
Mainlining is a fairly complicated process, especially if you're one of the first to start work on a given SoC. However through community effort there is a growing number of SoCs that have increasingly stable mainline ports (see below). In general it is relatively simple to take your existing Android kernel and boot it without any of the Android blobs, however from that point it can be a lot of working to create a working system and at the end of it you don't receive any security patches or general improvements.
Apart from purely practical insufficiencies, the cold hard truth is that the downstream code is simply not meant to be maintained or get used outside Android. The code quality is often several magnitudes worse, which makes maintenance rather complicated. Often large parts of the drivers are moved into proprietary parts in Android userspace - which are generally impossible to use without emulating the expected Android environment. At the end, the effort to make such drivers work properly on long term is often as much as rewriting them properly for mainline.
Successfully mainlining an SoC or device means that you benefit from every improvement the Linux kernel has to offer, you can run a fairly standard Linux distro (in theory even any Linux distro) and benefit from kernel updates and improvements without needing to compile your own kernel or deal with frustrating patches. A notable easy-to-notice benefit of running mainline is minimal-effort-needed GPU support for almost all GPUs (except PowerVR unfortunately), which is needed for using modern phone DEs like Plasma Mobile or Phosh with acceptable performance. Lastly, mainlining is a terrific learning opportunity that you will never regret.
If your device's SoC is in the list below there's a very decent chance that you can get the same functionality working on your device and eventually upstream your patches to the kernel, helping to build a solid base for other devices too!
Some SoCs are already supported quite well and are used for some devices in postmarketOS. Getting started with one of these might be easier for you, because you can get help from others working with the same SoC. The feature matrix below shows which features are already supported for a particular SoC. The pages for each SoC will provide more information, plus hints how to get started and who you can contact.
- CPU: SMP (bring up secondary CPU cores), CPU frequency scaling, CPUidle
- Storage: eMMC, SD cards, UFS, ...
- Video: Hardware-accelerated video de/encoding
- Modem: Calls, SMS, Internet
- Suspend: Can reach (all) low-power modes of the SoC during suspend (either system suspend or cpuidle).
- Unavailable (-) means that such a feature is not built directly into SoC. For example, WiFi/BT are also often used through SDIO/UART which can be chosen independently from the SoC.
Note: The statuses displayed below signify if a particular feature was tested on a device by someone in the postmarketOS community - not necessarily the components supported in the mainline kernel.
|Intel Bay Trail||x86_64||2013||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y||-||-||-||-||N||Y|
|Nvidia Tegra 2||armv7||2010||Y||Y||Y||Y||Y||P||Y||Y||Y||Y||Y||-||-||-||-||P|
|Nvidia Tegra 3||armv7||2011||Y||Y||Y||Y||Y||P||Y||Y||Y||Y||Y||-||-||-||-||P|
|Samsung Exynos 3250||armv7||2014||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y|
|Samsung Exynos 4210||armv7||2011||Y||Y||Y||Y||Y||Y||Y|
|Samsung Exynos 4412||armv7||2012||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y|
|Samsung Exynos 5250||armv7||2012||Y||Y||Y||Y||Y||Y|
|Samsung Exynos 5422||arm||2014||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y|
|Samsung Exynos 5433||aarch64||2014||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y||Y|
|Samsung Exynos 8895||aarch64||2017||Y||Y|
|ST-Ericsson NovaThor U8500||armv7||2011||Y||Y||Y||Y||Y||Y||Y||Y||Y||-||-||-|
|Texas Instruments OMAP44xx||armv7||2011||Y||Y||P||Y||Y||Y||Y|
Mainlining related to postmarketOS is primarily discussed in the #postmarketOS-mainline channel. For one of the SoCs above there should be someone around who is able to help you to some extent. Note that you will be on your own for some of the problems - there are often device specific problems or components that no one has experience with yet.
Below are some more chat channels / mailing list that may be helpful for further help or if you want to work on a SoC that is not listed above (yet!):
|SoC||Where to ask for help|
|#postmarketOS-mainline (SoC-specific questions might be limited to those listed above)|
|Allwinner||#linux-sunxi on Freenode, firstname.lastname@example.org|
|Exynos||#replicant (with focus on older variants) or #linux-exynos on Libera (ask forkbomb, Putti, krzk), email@example.com|
|Mediatek||#linux-mediatek on Freenode, firstname.lastname@example.org|
|OMAP3||ask @pavelm, email@example.com|
|Qualcomm (msm...)||#linux-msm on Freenode, firstname.lastname@example.org|
|Tegra||ask @okias, #tegra on Freenode, email@example.com|
- Collect as much information about your device as you can: downstream kernel sources, specifications, schematics (can be sometimes found with your favorite search engine) are all going to prove invaluable when attempting to port a device to mainline.
- Serial debugging will be helpful especially in the beginning (before USB or network is working). Some devices expose it through the USB port or the audio jack; others have test points available on the mainboard.
- Choose a kernel tree:
- Mainline: (the last kernel version released by Linus Torvalds) Usually a good compromise of being recent, yet quite stable. torvalds/linux.git
- linux-next: A collection of recently merged changes from many subsystems; use this if you are working on a very recent SoC. next/linux-next.git
- There may be more WIP changes available in Linux kernel trees specific to your SoC.
- Compiling kernels with envkernel.sh is very useful to integrate kernel development into postmarketOS.
- If you are attempting to port to a SoC listed above, check the SoC wiki page for further help and instructions.
- Do not attempt to copy any code as-is from downstream. In general this won't work, and most importantly: it won't be accepted for inclusion into the mainline kernel upstream.
- Instead, try to understand what the downstream code does, and rewrite it from scratch for mainline by looking at similar code.
Materials to look into
This section include many useful sources to help you with mainlining as possible.
- Introduction into how mainlining is done, 2017 (52:37) Youtube LBRY
- Qualcomm SoC upstreaming adventures in 2020 Youtube LBRY
- Porting Linux to your favorite obscure Arm SoC, 2020 media.ccc.de Youtube LBRY
- Introduction into ARM architecture, 2017 (46:33) Youtube LBRY PDF
- Device Tree (DT) introduction, 2013 (1:12:14) Youtube LBRY PDF
- Device Tree: present, past, future, 2018 (37:28) Youtube LBRY PDF
- ARM64 SoC Linux Support Check-List, 2017 (42:38) Youtube LBRY PDF Very useful step-by-step guide what should be done to bring in SoC support
- Upstreaming ARM64 SoC's easier than before, 2019 (19:03) Youtube LBRY PDF
- How the ARM32 kernel starts by Linus Walleij
- Pin Control and GPIO, 2013 (48:03) Youtube LBRY PDF talk by Linus Walleij
- Common Clock Framework: How To Use It, 2013 (44:50) Youtube LBRYNot so useful, old and only a basic overview
- Timekeeping in the Linux Kernel - Stephen Boyd, Qualcomm Innovation Center, 2017 (34:41) Youtube LBRY About how clocksource works.
- How Dealing with Modern Interrupt Architectures can Affect Your Sanity Youtube LBRY PDF About interrupt controllers and their relationships
- Linux Kernel Display Architecture, 2013 (56:53) Youtube LBRY DRM/KMS, MIPI DSI, panels,... slightly old, need something newer.
- Demystifying Linux MIPI DSI Subsystem - Jagan Teki, 2019 (41:57) Youtube LBRY MIPI DSI, controllers, bridges, panels, DRM/KMS...
- Power Management Integrated Circuits: Keep the Power in Your Hands, 2017 Youtube LBRY About PMICs, regulators, power supply, fuelgauge, ...
Writing device trees:
- Device tree bindings (i.e. documentation how to specify devices in your device tree) are mandatory for all mainline drivers. You can check those in the
Documentation/devicetree/bindingsdirectory to see which options are supported by a particular driver.
- Device Tree Usage (beginner guide by elinux.org)
- Device Tree Specification
- Submitting patches: the essential guide to getting your code into the kernel
- Submitting Your First Patch to the Linux Kernel and Responding to Feedback
- Guide for git-send-email
- Mainlining Guide (very generic, parts are slowly incorporated into this page)
- MSM8916 Mainlining (specific to MSM8916, but might be helpful for similar Qualcomm SoCs)
- pmaports#175 Google Galaxy Nexus (samsung-maguro): Mainlining progress (initial tricks with RAM and some sleep calls before the reboots in the code to figure out where it was failing will also be useful for other devices)
- pmaports#153 Google Pixel 3 XL (google-crosshatch): mainlining attempt: progress and questions (useful for newer SoCs, useful info about force-reboot code, stub dtbo partition)