Difference between revisions of "Meizu Pro 5 (meizu-turbo)"

From postmarketOS
Jump to navigation Jump to search
(MR macro leads to old repo)
Line 64: Line 64:
  
 
== See also ==
 
== See also ==
{{MR|106}} Initial merge request
+
[https://gitlab.com/postmarketOS/pmaports/merge_requests/106 Initial merge request]
 
<!--
 
<!--
 
Link to related gitlab issues or merge requests like the following (replace CHANGEME with the ID, e.g. 1234):
 
Link to related gitlab issues or merge requests like the following (replace CHANGEME with the ID, e.g. 1234):

Revision as of 23:30, 15 December 2018

Meizu Pro 5
[[|200px|alt=Meizu 5 Pro]]
Meizu 5 Pro
Manufacturer Meizu
Name Pro 5
Codename meizu-turbo
Released 2015
Category testing
Original software Android 5, Ubuntu Touch
Hardware
Chipset Samsung Exynos 7420 Octa
CPU Octa-core (4x2.1 GHz Cortex-A57 & 4x1.5 GHz Cortex-A53)
GPU Mali-T760MP8
Display AMOLED, 16M colors
Storage 32GB/64GB
Memory 3GB/4GB
Architecture aarch64
Features
USB Networking
Works
Flashing
Partial
Touchscreen
Display
WiFi
Xwayland
FDE
Mainline
Battery
3D Acceleration
Accelerometer
Audio
Bluetooth
Camera
GPS
Mobile data
SMS
Calls
USB OTG



Contributors

elelel

Maintainer(s)

How to enter flash mode

The device has to be with unlocked bootloader. Android phone version has bootloader locked by default. Locked bootloader may be unlocked with a Beta FlymeOS image for the international phone version. International firmware can be flashed to Chinese phone if one changes phone's id (possible with a 5.1.x Chinese firmware, root and a hex editor).


Press volume down and power while turning on to get into fastboot mode.

Installation

Current pmbootstrap utility assumes that boot partition is always named 'boot' on fastboot devices. This device's boot partition has 'bootimg' label. Because of that boot partition must be either flashed directly with fastboot utility, or pmbootstrap config source code has to be fixed.

At the time of writing the device boots, but is unable to insert subpartitions from 'system' partition into kernel. kpartx -avs /dev/sda41 sees the partition table, but each subpartition inside appears to be corrupt. USB networking workds, telnet debugging hook lets log in at early stage before root is mounted.


See also

Initial merge request