Difference between revisions of "Meizu Pro 5 (meizu-turbo)"

From postmarketOS
Jump to navigation Jump to search
(set "booting = yes" to make it show up in the device overview page)
m (infobox: remove "", that doesn't look good on the device overview page)
Line 16: Line 16:
 
| status_usbnet = Y
 
| status_usbnet = Y
 
| status_flashing = P
 
| status_flashing = P
| status_touch = ""
+
| status_touch =  
 
| status_screen = N
 
| status_screen = N
| status_wifi = ""
+
| status_wifi =  
| status_xwayland = ""
+
| status_xwayland =  
| status_fde = ""
+
| status_fde =  
| status_mainline = ""
+
| status_mainline =  
| status_battery = ""
+
| status_battery =  
| status_3d = ""
+
| status_3d =  
| status_accel = ""
+
| status_accel =  
| status_audio = ""
+
| status_audio =  
| status_bluetooth = ""
+
| status_bluetooth =  
| status_camera = ""
+
| status_camera =  
 
| status_gps = <!-- The Global Positioning System sensor works.  -->
 
| status_gps = <!-- The Global Positioning System sensor works.  -->
 
| status_mobiledata = <!-- Connecting to the Internet via cellular network. -->
 
| status_mobiledata = <!-- Connecting to the Internet via cellular network. -->

Revision as of 07:23, 17 December 2018

Meizu Pro 5
[[|200px|alt=Meizu 5 Pro]]
Meizu 5 Pro
Manufacturer Meizu
Name Pro 5
Codename meizu-turbo
Released 2015
Category testing
Original software Android 5, Ubuntu Touch
Hardware
Chipset Samsung Exynos 7420 Octa
CPU Octa-core (4x2.1 GHz Cortex-A57 & 4x1.5 GHz Cortex-A53)
GPU Mali-T760MP8
Display AMOLED, 16M colors
Storage 32GB/64GB
Memory 3GB/4GB
Architecture aarch64
Features
USB Networking
Works
Flashing
Partial
Touchscreen
Display
Broken
WiFi
Xwayland
FDE
Mainline
Battery
3D Acceleration
Accelerometer
Audio
Bluetooth
Camera
GPS
Mobile data
SMS
Calls
USB OTG



Contributors

elelel

Maintainer(s)

How to enter flash mode

The device has to be with unlocked bootloader. Android phone version has bootloader locked by default. Locked bootloader may be unlocked with a Beta FlymeOS image for the international phone version. International firmware can be flashed to Chinese phone if one changes phone's id (possible with a 5.1.x Chinese firmware, root and a hex editor).


Press volume down and power while turning on to get into fastboot mode.

Installation

Current pmbootstrap utility assumes that boot partition is always named 'boot' on fastboot devices. This device's boot partition has 'bootimg' label. Because of that boot partition must be either flashed directly with fastboot utility, or pmbootstrap config source code has to be fixed.

Status

Currently when turned on, the device enters reboot loop. USB networking workds, telnet debugging hook lets log in at early stage before the reboot. All steps from init.sh until switch_root when entered manually in telnet debug shell seem to work without problem. The display is not working - blank black screen. If provoked to display an early splash (e.g. no rootfs), a black image is displayed with white lines on the left and top borders, as if it is a part of zoomed in image.


See also

Initial merge request