Difference between revisions of "Motorola Moto G5 (motorola-cedric)"

From postmarketOS
Jump to navigation Jump to search
(Remove Xorg fix (patch for that is now in the repo))
Line 54: Line 54:
 
== Notes ==
 
== Notes ==
 
* OTG might not work on mouses, USB sound cards and devices with heavy power requirements, for example USB HDD enclosures (might work with a powered USB hub or a Y USB cable). Also you might need to restart Weston after unplugging and plugging back in a device.
 
* OTG might not work on mouses, USB sound cards and devices with heavy power requirements, for example USB HDD enclosures (might work with a powered USB hub or a Y USB cable). Also you might need to restart Weston after unplugging and plugging back in a device.
* Xorg works after running <code>cat /sys/class/graphics/fb0/modes > /sys/class/graphics/fb0/mode</code> as root and restarting Lightdm or starting the DE manually.
 
 
* Hildon has messed up colors and is in portrait mode.
 
* Hildon has messed up colors and is in portrait mode.
 
* charging-sdl was tested manually through the debug shell.
 
* charging-sdl was tested manually through the debug shell.

Revision as of 12:10, 3 February 2019

Motorola Moto G5
motorola-cedric
motorola-cedric
Manufacturer Motorola
Name Moto G5
Codename motorola-cedric
Released 2017
Category testing
Original software Android 7
Hardware
Chipset Qualcomm Snapdragon 430
CPU Octa-core 2.0 GHz Cortex-A53
GPU Adreno 505
Display 1080x1920 IPS
Storage 16 GB
Memory 2 or 3GB
Architecture aarch64
Unixbench Whet/Dhry score 1850.2
Features
USB Networking
Works
Flashing
Partial
Touchscreen
Works
Display
Works
WiFi
Works
Xwayland
Works
FDE
Mainline
Battery
Works
3D Acceleration
Accelerometer
Audio
Bluetooth
Camera
Broken
GPS
Mobile data
SMS
Calls
USB OTG
Works



Contributors

  • Hacker420

Maintainer(s)

  • Hacker420

How to enter flash mode

  • Power + Volume Down buttons or use adb reboot-bootloader

Installation

I installed the rootfs on a SD card. Flashing the kernel to the boot partition not tested, rootfs flashing too.

$ pmbootstrap flasher boot

Notes

  • OTG might not work on mouses, USB sound cards and devices with heavy power requirements, for example USB HDD enclosures (might work with a powered USB hub or a Y USB cable). Also you might need to restart Weston after unplugging and plugging back in a device.
  • Hildon has messed up colors and is in portrait mode.
  • charging-sdl was tested manually through the debug shell.
  • I suggest nmtui to connect to WiFi (remember to choose networks under wlan0)

See also