Nobby 230 (nobby-230)

From postmarketOS
Revision as of 16:51, 8 April 2020 by HenriDellal (talk | contribs)
Jump to navigation Jump to search
Nobby 230
Nobby 230
Nobby 230
Manufacturer Nobby
Name 230
Codename nobby-230
Released 2019
Category testing
Original software Mocor 5 OS (based on Android 4.4.2)
postmarketOS kernel 3.10.17
Hardware
Chipset Spreadtrum SC7715GA
CPU 1x 1.0 GHz Cortex-A7
GPU Mali-400 MP1
Display 240x320
Storage 512 MB
Memory 256 MB
Architecture armv7
Unixbench Whet/Dhry score 183.5
Features
USB Networking
Works
Flashing
Partial
Touchscreen
Unavailable
Display
Partial
WiFi
Xwayland
FDE
Mainline
Battery
Partial
3D Acceleration
Accelerometer
Unavailable
Audio
Partial
Bluetooth
Camera
GPS
Mobile data
SMS
Calls
USB OTG
Unavailable



Contributors

Maintainer(s)

Users owning this device


How to enter flash mode

Hold Accept and Power buttons to enter fastboot.

Issues

Bad screen output fixed, will be upstreamed soon
  • UbiFS partitions are not detected, so only sdcard installation will work

Installation

Install pmOS on microSD with pmbootstrap install --sdcard /dev/mmcblkX where /dev/mmcblkX is path to card that can be found with lsblk. Insert card in device, enter fastboot as written above and run

pmbootstrap flasher flash_kernel
fastboot reboot

fastboot boot doesn't work as intended.

Kernels

This section may be interesting for those who want to port postmarketOS on SP7715GA device. I've tried some downstream kernels and there are my findings:

  • bigzz/sc7715-kernel: boots, but doesn't support sdcardFS. UbiFS partitions weren't detected despite having related options set up in kernel config. This kernel may be used if your phone doesn't use ubiFS and you plan to flash pmOS on internal storage.
  • BLU kernel: supports sdcardFS, doesn't detect ubiFS partitions. Being used for this device as the best suiting kernel.
  • samsung-vivalto3gvn kernel: has defconfig only for vivalto, so it needs to be adjusted to fit sp7715ga. Has updated and refactored implementation of sprdfb. Screen doesn't work, the bootloader and kernel seem to not fit each other, so kernel decides to use panel_id=0, which leads to using lcd_dummy driver. Also, the kernel is very unpredictable and booted only once for me, even though I didn't rebuild it for other attempts.
  • Blade AF3 kernel: has building issues with autotst driver.

See also