Samsung Galaxy Grand Prime Plus (samsung-grandpplte)

From postmarketOS
Revision as of 20:42, 11 February 2023 by Tooniis (talk | contribs) (Update status)
Jump to navigation Jump to search
Samsung Galaxy Grand Prime+
Grand Prime+ running stock Android
Grand Prime+ running stock Android
Manufacturer Samsung
Name Galaxy Grand Prime+
Codename samsung-grandpplte
Released 2016
Category testing
Original software Android 6.0.1
Hardware
Chipset MediaTek MT6737T
CPU 4x 1.44 GHz Cortex-A53
GPU Mali-T720 MP2
Display 540x960 LCD
Storage 8 GB
Memory 1.5 GB
Architecture aarch64
Features
USB Networking
Works
Flashing
Works
Touchscreen
Works
Display
Works
WiFi
Broken
FDE
Broken
Mainline
Works
Battery
Broken
3D Acceleration
Works
Audio
Broken
Bluetooth
Broken
Camera
Broken
GPS
Broken
Mobile data
Broken
SMS
Broken
Calls
Broken
USB OTG
Broken
NFC
Unavailable
Sensors
Accelerometer
Works
Magnetometer
Unavailable
Ambient Light
Unavailable
Proximity
Broken
Hall Effect
Unavailable
Barometer
Unavailable
Power Sensor
Unavailable
Misc
Camera Flash
Keyboard
Unavailable
Touchpad
Unavailable
USB-A
Unavailable
HDMI/DP
Unavailable
Ir TX
Unavailable
Ir RX
Stylus
Haptics
Ethernet
FOSS bootloader
Partial
U-Boot
Primary Bootloader
Broken
Secondary Bootloader
Works
Mainline
Broken
Internal Storage
Works
SD card
Broken
USB Host
USB Peripheral
Display
Broken
Keyboard
Unavailable
Buttons
Works



Note Note: This page is about Samsung Galaxy Grand Prime Plus based on MediaTek MT6737T.

Contributors

  • Tooniis

Users owning this device


How to enter flash mode

While turned off, hold Power+Home+Volume Down, then a menu will appear. Press Volume Up to proceed to flash mode.

UART

Accessing UART is possible through the microUSB port by putting a 619kΩ resistor between the ID pin and ground. Read Serial debugging for more on that. Baud rate is 115200.

Status

Feature Components Status
USB Inventra MUSB1

MediaTek T-PHY1

P Limited to peripheral mode. PHY driver needs some work to enable host mode.
eMMC MediaTek MSDC1

Samsung KMQN10006B-B318

P Limited to HS200 mode. HS400 causes some tuning issues. MSDC driver needs more work.
microSD Slot MediaTek MSDC1 N Card doesn't respond to commands. Possible power issue.
Display Samsung S6D78A0

MediaTek DISPSYS1

Y
GPU ARM Mali-T7201 Y
WiFi MediaTek CONSYS1 N
Bluetooth N
GNSS N
Modem TBD N
Audio Codec MediaTek MT6328 N
Video Codec MediaTek VENCSYS1

MediaTek VDECSYS1

N
Battery Samsung 1ICP6/57/61

Samsung S2MU005

N S2MU005 PMIC needs drivers.
Rear Camera TBD

MediaTek IMGSYS1

N
Front Camera TBD

MediaTek IMGSYS1

N
Accelerometer Bosch BMA254 Y
Proximity Sensor Sharp GP2AP070S00F N
Touchscreen Zinitix BT541 Y Using bit-banged I2C for now. Hardware I2C driver needs more work.
Touchkeys N
Buttons GPIO controller1

MediaTek MT6328

Y
Haptics MediaTek MT6328

ERM

Y
LEDs Samsung S2MU005 N S2MU005 PMIC needs drivers.

1: Part of SoC

See also