Samsung Galaxy Note 4 S-LTE (samsung-tre3calte)
Note 4 S-LTE
|Name||Galaxy Note 4 S-LTE|
|Original software||Android Bionic/Linux 4.4.2 (Linux 3.4)|
|Chipset||Samsung Exynos 5433|
|Display||2560x1440 AMOLED (Video Mode Panel)|
Users owning this device
Recovery zip install works nicely.
The device on the mainline kernel is the "Samsung TM2" and "Samsung TM2e". The TM2 is the Samsung Tizen reference device, and TM mean Tizen Mobile. These devices uses a "special" 64bit version of sboot (or at least the arm trustzone firmware) to be able to boot arm64 kernels. All other phones and tablets with exynos5433 has 32bit sboot, and cannot boot a 64bit kernel. Unfortunately there seem to exist few tm2/tm2e device in the world, and firmware files for them does not seem to be downloadable anywhere. To have any chance to boot an arm64 mainline kernel on tre3calte and other exynos5433 devices we would need to get our hands on these firmware files, or in some other way create 64bit sboot/trustzone firmware for exynos5433.
See these chat logs for relevant discussions:
Tm2 and tm2e uses u-boot rather than Samsungs proprietary variant. There was a patch sent to the u-boot project to add support for it, but it was not accepted in the sent form: U-Boot support patch. Booting u-boot should, in theory, be possible by flashing it to the BOOT partition, to which android's boot.img is normally flashed.
A "standard" serial debugging cable with 619 kOhm works for tre3calte (and other exynos5433 devices). The bootloader prints lots of output during boot, but for some reason the kernel is quiet, even if the console parameter is changed. A patch similar to the one found here for Galaxy S7 might be necessary to get any live kernel output.