Open main menu
Samsung Galaxy S5
Samsung Galaxy S5
Samsung Galaxy S5
Manufacturer Samsung
Name Galaxy S5
Codename samsung-klte
Released 2014
Category testing
Original software Android 4.4.2 (KitKat)
postmarketOS kernel 3.4.113 / 5.6
Chipset Qualcomm MSM8974PRO-AC Snapdragon 801
CPU Quad-core 2.5 GHz Krait 400
GPU Adreno 330
Display 1080 x 1920 AMOLED
Storage 16/32 GB
Memory 2 GB
Architecture armv7
Unixbench Whet/Dhry score 884.3
USB Networking
3D Acceleration
Mobile data



Users owning this device

What works

  • Flash Kernel (pmbootstrap flasher flash_kernel)
  • Flash Rootfs (pmbootstrap flasher flash_rootfs)
  • Initramfs boot
  • USB Network
  • Framebuffer graphics (Splash screens)
  • SSH Connectivity
  • Touchscreen
  • Wi-Fi
  • Xwayland
  • Weston on framebuffer [broken with latest weston]
  • Plasma Mobile on framebuffer [untested with last update]
  • X11 based UIs on framebuffer work fine
  • Android container starts
  • audio works with nonfree-userland (with Android container)

What does not work

  • Audio playback without nonfree-userland
  • Bluetooth adapter is visible in rfkill list, but does not work
  • Everything else

How to enter flash mode

Press and hold Volume Down + Home + Power simultaneously. Then click Volume Up to confirm.

How to enter recovery mode

Press and hold Volume Up + Home + Power simultaneously.


First, install pmbootstrap.

Setup device to be used:

$ pmbootstrap init
Vendor [samsung]: samsung <- enter this
Device codename [i9100]: klte   <- enter this
Kernel [downstream]: downstream        <- you probably want downstream for now
User interface [weston]:               <- choose any UI by your preference

Build the rootfs image:

$ pmbootstrap install

Then in order to flash it put your device in download mode, and plug it in USB. Then do:

$ pmbootstrap flasher flash_rootfs

 Hold "Volume down" + "Home" buttons at the end of the process,
 so that when phone reboots put it in flashing mode again 

$ pmbootstrap flasher flash_kernel

 This time, don't hold any button, let it reboot to Linux!

Nonfree-userland (halium) installation

Android processes running inside lxc container

To make full use of nonfree-userland intallation, which involves running Android in lxc container to make all hardware work (read more at Hybris wiki page), you need to to manually download and install custom device-specific Android/Halium system image. Building it manually takes a lot of time and free space on HDD, so I've prepared prebuilt image:

You need to download it, un-sparse and place in to root of userdata partition:


$ simg2img halium-klte-2019-07-09-system.img halium-klte-2019-07-09-system.img.raw

If it says "invalid sparse format or header magic" it means that the image is already unsparsed. Proceed to next step

Reboot phone to TWRP recovery and push image using ADB:

$ adb push halium-klte-2019-07-09-system.img.raw /data/system.img

Boot to a running postmarketOS system and login with SSH using USB_Network. Next commands are executed on the phone. Make sure that you have a /data mounted (check output of mount command). Ensure that Android is fully running inside an lxc container (on device, install htop, run it and switch into tree mode by pressing t) (see the picture on the right). If it does not, check if lxc-android is running (see output of rc-status command). Run logcat and see if it is printing some error logs on the screen.

Before (re)starting lxc-android, remember to remove file /tmp/lxc-android-once if it exists.

Additional info

Useful helper scripts

Default installation includes a couple of useful scripts to be used from a terminal: battery-status and set-brightness. battery-status allows you to check for battery charge level, and set-brightness allows to view/set lcd backlight brightness in range 0-255.

samsung-klte:~$ battery-status 
samsung-klte:~$ set-brightness 
samsung-klte:~$ sudo set-brightness 20

Partition layout

Partition layout:

~ # fdisk -l /dev/block/mmcblk0
Found valid GPT with protective MBR; using GPT

Disk /dev/block/mmcblk0: 30777344 sectors, 2740M
Logical sector size: 512
Disk identifier (GUID): 98101b32-bbe2-4bf2-a06e-2bb33d000c20
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 30777310

Number  Start (sector)    End (sector)  Size       Code  Name
   1            8192           38911       15.0M   0700  apnhlos
   2           38912          156543       57.4M   0700  modem
   3          156544          157567        512K   0700  sbl1
   4          157568          157695       65536   0700  dbi
   5          157696          157759       32768   0700  ddr
   6          157760          161855       2048K   0700  aboot
   7          161856          162879        512K   0700  rpm
   8          162880          163903        512K   0700  tz
   9          163904          170047       3072K   0700  fsg
  10          170048          184319       7136K   0700  pad
  11          184320          204799       10.0M   0700  param
  12          204800          233471       14.0M   0700  efs
  13          233472          239615       3072K   0700  modemst1
  14          239616          245759       3072K   0700  modemst2
  15          245760          272383       13.0M   0700  boot
  16          272384          303103       15.0M   0700  recovery
  17          303104          329727       13.0M   0700  fota
  18          329728          344045       7159K   0700  backup
  19          344046          344047        1024   0700  fsc
  20          344048          344063        8192   0700  ssd
  21          344064          360447       8192K   0700  persist
  22          360448          378879       9216K   0700  persdata
  23          378880         5498879       2500M   0700  system
  24         5498880         5908479        200M   0700  cache
  25         5908480         6010879       50.0M   0700  hidden
  26         6010880        30777310       11.8G   0700  userdata

Component support table

Component Codename Mainline kernel Since when Downstream 3.4 kernel
Debug serial msm_serial /dev/ttyMSM0 Working v4.17-rc1 yes, /dev/ttyHSL0
Volume & home buttons gpio-keys Working 5.8 yes
Regulator nodes pma8084, Maxim max77826 Working 5.8 yes
Internal storage sdhci-msm Working 5.8 yes
SD card storage sdhci-msm Working In pmOS kernel fork yes
USB Networking usb_dwc3_qcom Working 5.8 yes
Display panel-simple Working In pmOS kernel fork yes
Touchscreen synaptics rmi4-i2c Working In pmOS kernel fork yes
Touchkeys Cypress tm2-touchkey Working In pmOS kernel fork yes
Vibration motor Not working yes
Notification LED Panasonic AN30259A Working In pmOS kernel fork yes
WiFi brcmfmac + PCAL6416A GPIO Expander Working In pmOS kernel fork yes
USB OTG Not working yes
Bluetooth brcmfmac Not working no
Battery charger Maxim max77804k Not working yes
Battery fuelgauge Maxim max17048 Working In pmOS kernel fork yes
GPU drm_msm Working in pmOS kernel fork works with libhybris (test_hwcomposer_7_1_caf)
Audio Not working with libhybris (pulseaudio-modules-droid)
Modem qcom-q6v5-mss Not working powers up with libhybris
Sensors Not working yes (libhybris's test_sensors)