Samsung Galaxy SIII SCH-I535 (samsung-d2vzw)

From postmarketOS
Revision as of 21:58, 22 December 2020 by Eloy (talk | contribs) (update arch)
Jump to navigation Jump to search
Note This device is still running on armhf, although the processor supports armv7. If you own it, change it and test it that way.
Samsung Galaxy S III (Verizon)
XFCE4 Desktop running
XFCE4 Desktop running
Manufacturer Samsung
Name Galaxy S III (Verizon)
Codename samsung-d2vzw
Released 2012
Category testing
Original software Android 4.0
Hardware
Chipset Qualcomm MSM8960 Snapdragon S4 Plus
CPU Dual-core Krait 1.5 GHz
GPU Adreno 225
Display 720x1280 AMOLED
Storage 16 GB, 32 GB
Memory 2 GB
Architecture armhf
Features
USB Networking
Works
Flashing
Partial
Touchscreen
Works
Display
Works
WiFi
FDE
Mainline
Battery
Works
3D Acceleration
Audio
Bluetooth
Camera
GPS
Mobile data
SMS
Calls
USB OTG
NFC
USB-A
HDMI/DP
Keyboard
Touchpad
Sensors
Accelerometer
Magnetometer
Ambient Light
Proximity
Hall Effect
Barometer
Power Sensor
Misc
Ir TX
TrustZone
FOSS bootloader



Contributors

  • Worldblender

Maintainer(s)

  • Worldblender

Users owning this device

How to enter flash mode

Set phone to ODIN mode

 1. Turn off phone
 2. Connect USB cable
 3. Hold VOLUME_DOWN + HOME + POWER until you get Warning!! screen
 4. Push VOLUME_UP to continue to ODIN mode screen

Installation

Clone from https://gitlab.com/Worldblender/pmaports, as this device is currently not yet merged upstream.

After the flashing process is done, results should be similar to the image below: Samsung-d2vzw splash-screen.jpg

See also