Difference between revisions of "Samsung Galaxy Tab 2 10.1 (3G and Wifi) (samsung-espresso10)"

From postmarketOS
Jump to navigation Jump to search
m
Line 8: Line 8:
 
| releaseyear = 2012
 
| releaseyear = 2012
 
| originalsoftware = Android 4.0.1 ICS
 
| originalsoftware = Android 4.0.1 ICS
| chipset = TI OMAP4430
+
| chipset = TI OMAP 4430
| cpu = 2x TI OMAP 4 (ARM Cortex A9 based) @ 1GHz
+
| cpu = Dual-core 1.0 GHz Cortex-A9
 
| gpu = PowerVR SGX540 @ 307 MHz
 
| gpu = PowerVR SGX540 @ 307 MHz
 
| storage = 16GB (expandable with up to 32GB MicroSD)
 
| storage = 16GB (expandable with up to 32GB MicroSD)

Revision as of 21:09, 29 August 2018

Samsung Galaxy Tab 2 10.1"
Galaxy Tab 2 10.1" booted into postmarketOS with weston
Galaxy Tab 2 10.1" booted into postmarketOS with weston
Manufacturer Samsung
Name Galaxy Tab 2 10.1"
Codename espresso10
Released 2012
Category testing
Original software Android 4.0.1 ICS
Hardware
Chipset TI OMAP 4430
CPU Dual-core 1.0 GHz Cortex-A9
GPU PowerVR SGX540 @ 307 MHz
Display 1280x800
Storage 16GB (expandable with up to 32GB MicroSD)
Memory 1GB
Features
USB Networking
Flashing
Touchscreen
Display
WiFi
Xwayland
FDE
Mainline
Battery
3D Acceleration
Accelerometer
Audio
Bluetooth
Camera
GPS
Mobile data
SMS
Calls
USB OTG


Contributors

  • WilliamO7

Maintainer(s)

  • WilliamO7

What works

  • Display
  • Weston
  • Touchscreen
  • USB
  • Wifi (if started up manually, there's still some problems on boot)
  • FDE w/ osk-sdl

What does not work

  • RIL (hasn't been setup yet, but Replicant got it going on the android side so it should be possible.)
  • 2D + 3D acceleration (so most UIs slow down to a crawl, such as plasma-mobile.)

To test/do

  • Audio
  • Graphics Acceleration
  • GPS/Compass/Sensors
  • RIL

How to enter flash mode

Press Power + Volume Up to enter download/odin mode.

Installation

This has to be done in two parts:

  • First create an android recovery image of PMOS and flash it using TWRP.
  • Then use the usual heimdall flasher method to install the kernel and initramfs (flash_kernel).

Doing both with one method results in errors in both situations.

Links

LineageOS: