Samsung Galaxy Tab 3 7.0 (samsung-lt023g)
From postmarketOS
USB Networking |
Works |
---|---|
Flashing |
Works |
Touchscreen |
Works |
Display |
Works |
WiFi | |
Xwayland |
Works |
FDE |
Works |
Mainline | |
Battery | |
3D Acceleration | |
Accelerometer | |
Audio | |
Bluetooth | |
Camera |
Works |
GPS | |
Mobile data | |
SMS | |
Calls | |
USB OTG | |
Contents
Entering flash mode
- Power down the device, then press and hold
Volume Down
+Home
+Power
simultaneously. - Once the device vibrates, release
Power
, but keepVolume Down
andHome
held. - The device will ask you if you wish upload a custom OS. Press
Volume Up
to confirm. - Once the device displays "Odin mode" in the top-left of the screen, it is ready for flashing.
Entering recovery mode
- Power down the device, then press and hold
Volume Up
+Home
+Power
simultaneously. - Once the device vibrates, release
Power
, but keepVolume Up
andHome
held.
Installing the kernel
This can be done via pmbootstrap flasher flash_kernel
after entering flash mode.
What works
- Booting off a microSD card
- Display
- Touchscreen
- USB networking
- Full disk encryption
- Physical buttons
- Touch keys
- Backlight brightness
- Battery indicator
- Wayland
- X11
- Front Camera(and probably back but didnt figure out how to switch cams)
What does not work
- Bluetooth
- Wi-Fi
- Cellular networking
- 3D Acceleration
- Video decoding is like 2-3FPS
Everything else is untested as of writing this.
Links
- Kernel source
- Unofficial TWRP
- #1484 Add support for the Samsung Galaxy Tab 3 7.0 (lt023g)