Samsung Galaxy Tab 3 7.0 (samsung-lt023g)
USB Networking |
Works |
---|---|
Flashing |
Works |
Touchscreen |
Works |
Display |
Works |
WiFi |
Works |
Xwayland |
Works |
FDE |
Works |
Mainline | |
Battery | |
3D Acceleration | |
Accelerometer | |
Audio | |
Bluetooth | |
Camera |
Works |
GPS | |
Mobile data | |
SMS | |
Calls | |
USB OTG | |
Contents
Entering flash mode
- Power down the device, then press and hold
Volume Down
+Home
+Power
simultaneously. - Once the device vibrates, release
Power
, but keepVolume Down
andHome
held. - The device will ask you if you wish to upload a custom OS. Press
Volume Up
to confirm. - Once the device displays "Odin mode" in the top-left of the screen, it is ready for flashing.
Entering recovery mode
- Power down the device, then press and hold
Volume Up
+Home
+Power
simultaneously. - Once the device vibrates, release
Power
, but keepVolume Up
andHome
held.
Installing the kernel
This can be done via pmbootstrap flasher flash_kernel
after entering flash mode.
What works
- Booting off a microSD card
- Display
- Touchscreen
- USB networking
- Full disk encryption
- Physical buttons
- Touch keys
- Backlight brightness
- Battery indicator
- Wayland
- X11
- Front Camera(and probably back but didnt figure out how to switch cams)
- WiFi
How hpagseddy get camera working
Right now it's not usable for daily use, just for testing camera quality and checking if camera is working or not. I used "motion" package from alpine linux to capture pictures. If you want to test it too, just use "apk add motion" command to install that package. Then simply type "motion" and it will start capturing pictures nearly every second. If it doesnt capture pictures or pictures are just black squares then your camera isnt working. For opening pictures, i used feh image viewer to view images but every gallery app works great.
How to get WiFi working
Install linux-firmware-mrvl
to get the necessary firmware files, reboot the device after install.
Run sudo ifconfig mlan0 up
, then configure wpa_supplicant
:
$ wpa_passphrase YOUR_SSID YOUR_PASSPHRASE | sudo tee /etc/wpa_supplicant/wpa_supplicant.conf
Then run:
sudo rc-service wpa_supplicant start sudo udhcpc -i mlan0
Note: You need to turn rndis0 off using sudo ifconfig rndis0 down
if you used USB Internet. Also remove usb_internet.start from /etc/local.d
.
If starting the service didn't work, start wpa_supplicant manually with:
sudo wpa_supplicant -u -Dnl80211 -B -c /etc/wpa_supplicant/wpa_supplicant.conf -imlan0
What does not work
- Bluetooth
- Cellular networking
- 2D and 3D Acceleration
- Video decoding is like 2-3FPS
- Audio
Everything else is untested as of writing this.
Links
- Kernel source
- Unofficial TWRP
- #1484 Add support for the Samsung Galaxy Tab 3 7.0 (lt023g)