Samsung Galaxy Tab E 9.6 (SM-T560NU) (samsung-gtelwifiue)

From postmarketOS
Revision as of 06:04, 26 June 2022 by Person4268 (talk | contribs) (Note that FDE is functional, quirk with the gyro, and that the touchscreen works properly now.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Samsung Galaxy Tab E 9.6 (SM-T560NU)
samsung-gtelwifiue running neofetch
samsung-gtelwifiue running neofetch
Manufacturer Samsung
Name Galaxy Tab E 9.6 (SM-T560NU)
Codename samsung-gtelwifiue
Released 2015
Category testing
Original software Android 5.1 (official update to Android 7.0)
postmarketOS kernel Mainline
Hardware
Chipset Qualcomm APQ8016 Snapdragon 410
CPU 1.2 GHz Quad ARM Cortex-A53
GPU Adreno A306
Display 800x1280 NT51017
Storage 16 GB
Memory 1.5 GB
Architecture aarch64
Unixbench Whet/Dhry score 1033.5
Features
USB Networking
Works
Flashing
Works
Touchscreen
Works
Display
Partial
WiFi
Works
FDE
Works
Mainline
Works
Battery
Broken
3D Acceleration
Works
Audio
Broken
Bluetooth
Works
Camera
Broken
GPS
Broken
Mobile data
Unavailable
SMS
Unavailable
Calls
Unavailable
USB OTG
Broken
NFC
Unavailable
Sensors
Accelerometer
Works
Magnetometer
Ambient Light
Proximity
Hall Effect
Barometer
Power Sensor
Misc
Keyboard
Touchpad
USB-A
HDMI/DP
Ir TX
Unavailable
TrustZone
FOSS bootloader


This device is based on the Snapdragon 410.
See the SoC page for common tips, guides and troubleshooting steps

Contributors

Users owning this device


Installation

Note Note: Enter lk2nd fastboot mode by pressing only Volume Down + Power (not the Home button). Pressing the Home button additionally will bring you to the Samsung Download mode.
  1. Install lk2nd (alternative bootloader that provides a standard fastboot interface)
  2. Follow Qualcomm_Snapdragon_410/412_(MSM8916)#Installation.

Touch keys

See Tm2-touchkey. The touch keys are handled through the Zinitix touchscreen, but the Input section should mostly apply.

Notes

Touchscreen works for the most part, but acts weirdly with some on-screen keyboards and DE's. (Fixed in newer kernel versions with an update to the zinitix module.) A driver needs to be written for the backlight, lcd will be always on (driver currently WIP). In DE's with auto-rotation, it should be turned off as rotation is fairly uncontrolled (needs investigation).

See also