Samsung Galaxy Tab S2 9.7 LTE (samsung-gts210lte)
![]() Samsung Galaxy Tab S2 9.7 LTE | |
Manufacturer | Samsung |
---|---|
Name | Galaxy Tab S2 9.7 LTE |
Codename | samsung-gts210lte |
Released | 2016 |
Category | testing |
Original software | Android |
Original version | 7.0 |
Hardware | |
Chipset | Samsung Exynos 5433 |
CPU | Octa-core Cortex-A53 & Cortex-A57, 4 x 1.9 GHz & 4 x 1.3 GHz |
GPU | Mali-T760 MP6 |
Display | 1536x2048 (264 PPI) HD Super AMOLED |
Storage | 32 GB |
Memory | 3 GB |
Architecture | armv7 |
USB Networking |
Works |
---|---|
Flashing |
Works |
Touchscreen |
Works |
Display |
Works |
WiFi |
Broken |
FDE | |
Mainline |
Broken |
Battery | |
3D Acceleration | |
Audio | |
Bluetooth |
Broken |
Camera |
Broken |
GPS |
Broken |
Mobile data |
Broken |
SMS |
Broken |
Calls |
Broken |
USB OTG | |
NFC | |
Accelerometer | |
---|---|
Magnetometer | |
Ambient Light | |
Proximity | |
Hall Effect | |
Barometer | |
Power Sensor | |
Camera Flash | |
---|---|
Keyboard | |
Touchpad | |
USB-A | |
HDMI/DP | |
Ir TX | |
Ir RX | |
Stylus | |
Haptics | |
Ethernet | |
FOSS bootloader | |
Contributors
Users owning this device
What works
- Touchscreen
- USB network
Unlike on many other Samsung devices, wifi does not work out of the box after adding firmware files. The firmware package that exists for the device provides all the wifi firmware files that should be necessary, but do not actually make wifi work (as of now).
Installation
Installation can be done with the standard installation instructions. Heimdall cannot flash the rootfs though, so if you want to install to the internal storage you need to do that with the --android-recovery-zip method (generate a zip and install it through twrp/recovery).
See also
- pmaports!2599 Initial merge request