Difference between revisions of "Samsung Galaxy Tab S2 9.7 Wifi (samsung-gts210vewifi)"

From postmarketOS
Jump to: navigation, search
(created page)
 
m (See also: add link to LineageOS android_device_samsung_gts210vewifi repo)
Line 45: Line 45:
 
== See also ==
 
== See also ==
 
* [https://wiki.lineageos.org/devices/gts210vewifi Device Info (LineageOS)]
 
* [https://wiki.lineageos.org/devices/gts210vewifi Device Info (LineageOS)]
 +
* [https://github.com/LineageOS/android_device_samsung_gts210vewifi LineageOS android_device_samsung_gts210vewifi repo]
 
* [https://github.com/LineageOS/android_kernel_samsung_msm8976/archive/82d475a1952b9bbb6652b35e87671b5031bcf934.tar.gz (LineageOS) Kernel 3.10.102 used]
 
* [https://github.com/LineageOS/android_kernel_samsung_msm8976/archive/82d475a1952b9bbb6652b35e87671b5031bcf934.tar.gz (LineageOS) Kernel 3.10.102 used]

Revision as of 12:18, 28 March 2018

Samsung Galaxy Tab S2 9.7 Wifi
Samsung Galaxy Tab S2 9.7 Wifi
Samsung Galaxy Tab S2 9.7 Wifi
Manufacturer Samsung
Name Galaxy Tab S2 9.7 Wifi
Codename SM-T813, gts210vewifi
Released 2016?
Original software Android 7.0
Hardware
Chipset Qualcomm MSM8976 Snapdragon 652
CPU Octa-core Cortex-A53 & Cortex-A72, 4 x 1.8 GHz & 4 x 1.4 GHz
GPU Adreno 510
Display 1536x2048 (264 PPI) HD Super AMOLED
Storage 32 GB
Memory 3 GB
Features
USB Networking
Flashing
Touchscreen
Display
WiFi
Xwayland
FDE
Mainline
Battery
3D Acceleration
Accelerometer
Audio
Bluetooth
Camera
GPS
Mobile data
SMS
Calls
USB OTG


Contributors

  • K-laus

Maintainer(s)

  • K-laus

What works

  • compiling kernel

What does not work

  • booting
  • everything else

How to enter flash mode

  • Recovery: With the device powered off, hold Home + Volume Up + Power.
  • Download: With the device powered off, hold Home + Volume Down + Power.

Sometimes, to enter Recovery it is needed to first enter Download mode, then again hold Home + Volume Down + Power and while screen goes blank, switch to hold Home + Volume Up + Power.

Unlocking

In Android go to settings -> System -> About phone and tap the build number 7 times. Then go to settings -> system -> developer options and enable OEM unlocking

Installation

  • had problems with "heimdall flash --KERNEL ..." command used by "pmbootstrap flasher flash_kernel", it did stop with "ERROR: Partition "KERNEL" does not exist in the specified PIT."
  • so did flash via TWRP recovery zip file, but after trying to boot: no screen output, no connectivity.

See also