Difference between revisions of "Samsung Galaxy Trend Plus (samsung-s7580)"

From postmarketOS
Jump to: navigation, search
(Misc)
Line 64: Line 64:
 
*Audio and video works in chromium.
 
*Audio and video works in chromium.
 
*I used a 150kΩ resistor in my USB debug cable. See https://wiki.postmarketos.org/wiki/Serial_debugging
 
*I used a 150kΩ resistor in my USB debug cable. See https://wiki.postmarketos.org/wiki/Serial_debugging
 +
*Serial port is on /dev/ttyS2 in pmOS.
  
 
== Pictures ==
 
== Pictures ==

Revision as of 11:58, 27 December 2018

Samsung Galaxy Trend Plus
Manufacturer Samsung
Name Galaxy Trend Plus
Codename samsung-kylepro
Released 2013
Original software Android 4.2.2
Hardware
Chipset BCM21664T
CPU Cortex-A9
GPU VideoCore IV
Display 480x800 (240dpi)
Storage 4GB
Memory 768MB
Architecture armhf
Features
USB Networking
Works
Flashing
Works
Touchscreen
Works
Display
Works
WiFi
Works
Xwayland
FDE
Mainline
Battery
3D Acceleration
Accelerometer
Audio
Bluetooth
Camera
GPS
Mobile data
SMS
Calls
USB OTG



Contributors

  • Deata

Maintainer(s)

  • Deata

What works

  • Screen
  • Touch
  • USB Network
  • Wifi
  • Touch (/dev/input/event2)

What does not work

  • Flashing rootfs to internal storage. (Flash to sdcard instead)
  • Setting up wifi using networkmanager. (Wifi works when setting up manually with wpa_supplicant and dhcpcd)
  • Everything else

How to enter flash mode

  • Press volume down and the home key, then press the power button.
  • Maintain volume down and home pressed until a warning screen comes up

Installation

  • 1. Flash the kernel pmbootstrap flasher flash_kernel
  • 2. Install system image to sdcard pmboostrap install --no-fde --sdcard /dev/mmcblkXXX

Misc

Pictures

UART pin location on motherboard

Links