Open main menu

Changes

48 bytes added ,  05:38, 18 December 2020
m
* solder the wires to a [https://www.sparkfun.com/products/10031 microUSB type B breakout board]
* using a [https://www.adafruit.com/product/3972 USB Micro B Male Plug to 5-pin Terminal Block]- '''this method does not require soldering!'''
* solder the wires directly to a [https://www.adafruit.com/product/1826 microUSB type B plug] (note: the solder pads are very small, so it can be difficult to get just right. If you plan to use this method, order multiple plugs, in case you need to start over.)
364

edits