Difference between revisions of "Troubleshooting:kernel"

From postmarketOS
Jump to navigation Jump to search
(Troubleshooting:kernel - add example of removing -Werror from Makefiles)
(→‎Kernel compilation: thumb conditional instruction should be in IT block: The user should use kconfig edit to disable a kernel feature.)
Line 38: Line 38:
 
</pre>
 
</pre>
  
You can fix it by disabling <code>CONFIG_CRYPTO_AES_ARM_BS</code>.
+
You can fix it by disabling <code>CONFIG_CRYPTO_AES_ARM_BS</code> with:
 +
<source lang="bash">pmbootstrap kconfig edit</source>
 +
Then go to <code>Cryptographic API</code> and disable <code>Bit sliced AES using NEON instructions</code>.
  
 
On some other devices, like Huawei P7, you might also need to disable all CRYPTO flags containing ARM (<code>CONFIG_CRYPTO_{algorithm name}_ARM</code>), which are ARM NEON optimizations.
 
On some other devices, like Huawei P7, you might also need to disable all CRYPTO flags containing ARM (<code>CONFIG_CRYPTO_{algorithm name}_ARM</code>), which are ARM NEON optimizations.

Revision as of 17:30, 1 February 2021

Here are some common kernel compilation problems listed. For debugging a kernel that compiles, but does not boot, see Troubleshooting:boot.

How to create a patch

Patching a kernel is as simple as putting a .patch file in your aports/device/linux-vendor-flavor folder and adding the patch name to the source variable in your APKBUILD file. See also: Patching.

undefined reference to kgsl_iommu_sync_lock

drivers/built-in.o:(.data.rel+0x68c): undefined reference to kgsl_iommu_sync_lock'
drivers/built-in.o:(.data.rel+0x690): undefined reference to kgsl_iommu_sync_unlock'

You need to apply the gpu-msm-fix-gcc5-compile.patch patch.

How can I boot the kernel with some specific arguments?

You can configure CONFIG_CMDLINE so that the arguments are permanent or change it in boot time using fastboot or pmbootstrap, for example:

fastboot boot -c "console=ttyHSL0,115200,n8" ...

pmbootstrap flasher boot --cmdline "PMOS_NO_OUTPUT_REDIRECT"

MSM framebuffer doesn't work

We found out that removing the 3D driver support makes the MSM framebuffer. See !66.

CONFIG_MSM_KGSL=n

PTY allocation request failed

PTY allocation request failed on channel 0
-ash: a: unknown operand

Go to kernel configuration, you have probably missed CONFIG_DEVTMPFS!

Kernel compilation: (some header file): No such file or directory

Busybox' zip implementation does not extract symlinks. There are two workarounds. One is to use another archive type (typically kernel sources are downloaded from GitHub, where you can also get the source as .tar.gz - simply by changing the extension in the URL).

The other workaround is to add unzip to the makedepends, so it uses the original unzip instead of the busybox version.

(This has been fixed in busybox in the meantime.)

Kernel compilation: thumb conditional instruction should be in IT block

arch/arm/crypto/aesbs-core.S:449: Error: thumb conditional instruction should be in IT block -- `addeq r6,r6,#0x10'
arch/arm/crypto/aesbs-core.S:904: Error: thumb conditional instruction should be in IT block -- `addeq r6,r6,#0x10'
arch/arm/crypto/aesbs-core.S:2100: Error: thumb conditional instruction should be in IT block -- `subne r9,#0x10'

You can fix it by disabling CONFIG_CRYPTO_AES_ARM_BS with:

pmbootstrap kconfig edit

Then go to Cryptographic API and disable Bit sliced AES using NEON instructions.

On some other devices, like Huawei P7, you might also need to disable all CRYPTO flags containing ARM (CONFIG_CRYPTO_{algorithm name}_ARM), which are ARM NEON optimizations.

This was first noticed in pmaports!144.

Kernel compilation: BusyBox lzma compression fails

In case you get the following output:

LZMA    arch/arm/boot/compressed/piggy.lzma
lzma: unrecognized option: 9
BusyBox v1.26.2 (2017-06-11 06:37:13 GMT) multi-call binary.

Usage: lzma -d [-cf] [FILE]...

Decompress FILE (or stdin)

        -d      Decompress
        -c      Write to stdout
        -f      Force

In the BusyBox version shipped with Alpine Linux, only lower compression levels are enabled (to reduce the binary size). The kernel you're building is configured to compress with LZMA at the highest compression level. Pick one of the following solutions:

  • Add xz to the makedepends= line. Then the "real" lzma binary will be used instead of the Busybox version. This is recommended, because then your kernel will get built most similar to how it is built elsewhere, so you have the lowest risk of introducing a reason for the kernel not to boot (because the kernel is too big in size or something like that)
  • Reduce the compression ratio by adding this patch. This will not introduce any dependency, but increase the kernel size.
  • Use another compression algorithm (run pmbootstrap menuconfig linux-... and change it there). Gzip should work, but will produce a big kernel, because pmbootstrap currently installs a workaround to always use the fastest compression method (-1), when the most compressing one (-9) is chosen. This will increase the kernel size the most.

Kernel compilation: Error: .err encountered in assembler messages

If compilation errors out on something like this in logs:

/tmp/ccmAkEIJ.s: Assembler messages:
/tmp/ccmAkEIJ.s:2280: Error: .err encountered

Then older version of GCC should be used for compilation.

Android Kernel compilation fails on warnings (not on errors) (-Werror)

Don't even bother fixing all those warnings, there are too many of them and we don't want the outdated Android kernels in the long run anyway! When you generate your kernel APKBUILD with pmbootstrap init, then you should have code in the prepare() that automatically removes the -Werror parameter in all Makefiles.

Example from linux-asus-z00vd:

# Remove -Werror from all makefiles
local i
local makefiles="$(find . -type f -name Makefile)
    $(find . -type f -name Kbuild)"
for i in $makefiles; do
    sed -i 's/-Werror-/-W/g' "$i"
    sed -i 's/-Werror//g' "$i"
done

Building the kernel with Android's build system

It might be useful for debugging to build Android's kernel with Android's build system.

You can follow the LineageOS building guide for your device (see this for titan device as example).

The process should be similar for other devices:

# make some directories
mkdir -p ~/bin
mkdir -p ~/android/lineage

# download the 'repo' tool
curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
chmod a+x ~/bin/repo

# clone LineageOS
cd ~/android/lineage
~/bin/repo init -u https://github.com/LineageOS/android.git -b cm-14.1

# Download the rest of dependencies (this will take a while and about *TODO* GB of disk space)
~/bin/repo sync

# now prepare the build for your device (replace 'titan' with the device you want to for the kernel for)
source build/envsetup.sh
breakfast titan

# Now instead of following the rest of the guide (which will compile both Android and the kernel
#  for your device), simply compile the kernel:
mka kernel

# This command will also generate the device tree, initramfs and boot.img images
mka bootimage

You can check the $OUT environment variable and cd into it. In the case of titan the interesting generated files are:

  • ~/android/lineage/out/target/product/titan/boot.img (boot image ready to be flashed: kernel + initramfs)
  • ~/android/lineage/out/target/product/titan/dt.img (device trees)
  • ~/android/lineage/out/target/product/titan/kernel (linux image)
  • ~/android/lineage/out/target/product/titan/ramdisk.img (compressed initramfs)

The defconfig used is available at ~/android/lineage/kernel/motorola/msm8226/arch/arm/configs/titan_defconfig

Error: selected processor does not support ARM mode `smc #0'

Try this patch: https://github.com/imoseyon/leanKernel-galaxy-nexus/pull/6

X11 does not work on Qualcomm devices

Try apply this patch.

TLS (SSL/HTTPS) is broken!

If you see messages like these, when trying to access HTTPS pages, read on:

Connecting to pastebin.com (104.20.209.21:443)
ssl_client: pastebin.com: TLS connect failed
wget: error getting response: Connection reset by peer

You are probably running an older kernel (pre 3.17), which does not yet have the "getrandom" syscall. This is required by modern openssl/libressl versions (Alpine was on libressl for a long time, then switched back to openssl). Check your kernel version, and if that is the case, and mainlining is not feasible for you, consider backporting the getrandom syscall like done in pmaports!69. This issue was discussed in pmaports#107.

CROSS_COMPILE_ARM32 not defined or empty

Try unset CONFIG_COMPAT_VDSO from your kernel config.

External resources