From postmarketOS
Revision as of 20:16, 22 August 2020 by HenriDellal (talk | contribs) (New page: UBIFS)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

UBIFS is an unsorted block image file system. It works on top of UBI(erase block management layer) which itself works on top of memory technology device(MTD) layer.

How to mount UBIFS

To mount UBIFS it's required to have mtd-utils-ubi installed. Consider adding this package to makedepends of the device package, if the device uses UBIFS.

First, get list of all MTDs

$ cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00040000 00040000 "spl"
mtd1: 000c0000 00040000 "2ndbl"
mtd2: 00080000 00040000 "kpanic"
mtd3: 1fe80000 00040000 "ubipac"

Note that some of them cannot be used for mounting. In this case, only /dev/mtd3 can be used.

Next step is to attach UBI to an MTD.

# ubiattach /dev/ubi_ctrl -m 3
UBI device number 0, total 2042 LEBs (518569984 bytes, 494.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB)

Now, create mount point and mount the wanted partition

# mkdir -p /mnt/ubifs
# mount -t ubifs ubi0:system /mnt/ubifs

When work with partition is over, unmount it and detach a device

# umount /mnt/ubifs
# ubidetach -m 3