Wiko Lenny 2 (wiko-lenny2)

From postmarketOS
Revision as of 19:41, 26 November 2019 by Afontain (talk | contribs) (Created page with "{{Infobox device | manufacturer = Wiko | name = Lenny 2 | codename = wiko-lenny2 | image = File:Wiko-Lenny2-Bootloader-Splash.jpg | imagecaption = The most advanced booting s...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Wiko Lenny 2
The most advanced booting stage reached so far.
The most advanced booting stage reached so far.
Manufacturer Wiko
Name Lenny 2
Codename wiko-lenny2
Released Sept. 2015
Original software Android 5.1
Hardware
Chipset Mediatek mt6580
CPU Quad-core 1.3 GHz Cortex-A7
GPU Mali-400MP2
Display 480×854px, 5.0"
Storage 4GB
Memory 768MB
Architecture armv7
Features
USB Networking
Flashing
Touchscreen
Display
WiFi
Xwayland
FDE
Mainline
Battery
3D Acceleration
Accelerometer
Audio
Bluetooth
Camera
GPS
Mobile data
SMS
Calls
USB OTG


Contributors

  • afontain

Maintainer(s)

me, @afontain:gnugen.ch on matrix. Not that there is anything to maintain yet, though.

Users owning this device


How to enter flash mode

First, boot phone into recovery mode. To do that, power on while pressing both the up button and the power button. When the logo apears, release the power button.

Once in the recovery mode, navigate to "reboot to bootloader" using the volume keys.
In my case, I had to validate pressing the power button twice, then the power up button.

Kernel sources

TODO

Installation

There is nothing to install so far

See also