Wiko Lenny 2 (wiko-lenny2)

From postmarketOS
Revision as of 03:29, 28 November 2019 by Afontain (talk | contribs) (report progress)
Jump to: navigation, search
Wiko Lenny 2
The most advanced booting stage reached so far.
The most advanced booting stage reached so far.
Manufacturer Wiko
Name Lenny 2
Codename wiko-lenny2
Released Sept. 2015
Original software Android 5.1
postmarketOS kernel 3.10.72
Hardware
Chipset Mediatek mt6580
CPU Quad-core 1.3 GHz Cortex-A7
GPU Mali-400MP2
Display 480×854px, 5.0"
Storage 4GB
Memory 768MB
Architecture armv7
Features
USB Networking
Works
Flashing
Partial
Touchscreen
Partial
Display
WiFi
Xwayland
FDE
Mainline
Broken
Battery
3D Acceleration
Accelerometer
Audio
Bluetooth
Camera
GPS
Mobile data
SMS
Calls
USB OTG


Current status: the device boot but doesn't show anything on screen. It seems to go past initramfs but don't give ssh access although it creates a network interface and it is possible to ping it.

TODO: make this an issue.

Contributors

  • afontain

Maintainer(s)

me, @afontain:gnugen.ch on matrix. Not that there is anything to maintain yet, though.

Users owning this device


How to enter flash mode

First, boot phone into recovery mode. To do that, power on while pressing both the up button and the power button. When the logo appears, release the power button.

Once in the recovery mode, navigate to "reboot to bootloader" using the volume keys.
In my case, I had to validate pressing the power button twice, then the power up button.

Installation

The kernel and the initramfs can be flashed using pmbootstrap flasher flash_kernel. Flashing the rootfs require a workaround

Mainlining

downstream kernel sources, for reference

https://www.wikogeek.com/index.php?telephone=LENNY2&region=EUROPE&version=%25


See also