Xiaomi Mi 5s Plus (xiaomi-natrium)
![]() Xiaomi Mi 5s Plus running Plasma Mobile | |
Manufacturer | Xiaomi |
---|---|
Name | Mi 5s Plus |
Codename | xiaomi-natrium |
Released | 2016 |
Category | testing |
Original software | Android 6.0 (Marshmallow), MIUI 8.2 - Upgradeable to Android 8.0 |
Hardware | |
Chipset | Qualcomm Snapdragon 821 (MSM8996Pro) |
CPU | 2x2.35 GHz Kryo & 2x2.2 GHz Kryo |
GPU | Adreno 530 |
Display | 1080x1920 IPS LCD |
Storage | UFS 2.0 64/128GB |
Memory | 4/6 GB |
Architecture | aarch64 |
USB Networking |
Works |
---|---|
Flashing |
Works |
Touchscreen |
Works |
Display |
Works |
WiFi |
Partial |
FDE |
Works |
Mainline |
Works |
Battery |
Partial |
3D Acceleration |
Works |
Audio |
Partial |
Bluetooth |
Works |
Camera |
Broken |
GPS | |
Mobile data | |
SMS | |
Calls | |
USB OTG |
Works |
NFC |
Works |
Accelerometer |
Broken |
---|---|
Magnetometer | |
Ambient Light | |
Proximity | |
Hall Effect | |
Barometer | |
Power Sensor | |
Camera Flash | |
---|---|
Keyboard | |
Touchpad | |
USB-A | |
HDMI/DP | |
Ir TX |
Broken |
Ir RX | |
Stylus | |
Haptics | |
Ethernet | |
FOSS bootloader | |
This device is based on the Snapdragon 821. See the SoC page for common tips, guides and troubleshooting steps |
Contributors
- AlecJY
Users owning this device
- AlecJY
- Crystalast-29 (Notes: sharp panel is working on "natrium-sharp-panel" branch)
How to enter flash mode
Power off the device, then press and hold Power + Volume Down together for a few seconds.
Installation
Follow the installation guide to build and install.
What's not working
- Cellular
- Camera
- GPS
- Sensors
- IR
- Sharp panel varient, but JDI panel varient works good
- WiFi is unstable and the signal is poor (in some cases)
- Built-in speakers and microphone, only headphone jack works
Current Progress
IR
The IR led can be lighted up with ir-ctl
tool. Currently not test with real IR receivers.
Sharp panel varient
It seems that there is no obvious problem. If you own a Mi 5s Plus with a Sharp panel, you can try this version.
See also
- pmaports!3128 Initial merge request