Xiaomi Mi Pad 5 Pro (xiaomi-elish)
Jump to navigation
Jump to search
![]() Xiaomi Pad 5 Pro booting mainline with simple framebuffer. | |
Manufacturer | Xiaomi |
---|---|
Name | Mi Pad 5 Pro |
Codename | xiaomi-elish |
Released | 2021 |
Category | testing |
Original software | MIUI 12.5 (Android 11) |
Hardware | |
Chipset | Qualcomm SM8250-AC Snapdragon 870 5G |
CPU | Octa-core (1x3.2 GHz Kryo 585 & 3x2.42 GHz Kryo 585 & 4x1.80 GHz Kryo 585) |
GPU | Adreno 650 |
Display | 2560x1600 120HZ LCD |
Storage | 128/256 GiB |
Memory | 6/8 GiB |
Architecture | aarch64 |
USB Networking |
Works |
---|---|
Flashing |
Works |
Touchscreen |
Broken |
Display |
Partial |
WiFi | |
FDE | |
Mainline |
Works |
Battery |
Partial |
3D Acceleration |
Works |
Audio | |
Bluetooth | |
Camera | |
GPS | |
Mobile data |
Unavailable |
SMS |
Unavailable |
Calls |
Unavailable |
USB OTG | |
NFC |
Unavailable |
Accelerometer | |
---|---|
Magnetometer | |
Ambient Light | |
Proximity | |
Hall Effect | |
Barometer | |
Power Sensor | |
Keyboard | |
---|---|
Touchpad | |
USB-A | |
HDMI/DP | |
Ir TX |
Unavailable |
TrustZone | |
FOSS bootloader | |
Contributors
- Jianhua
Users owning this device
- Jianhua (Notes: mainlining in progress)
How to enter flash mode
You have to press Power + Volume Down to enter the bootloader.
Installation
(Optional) Backup super partiton(need root, recommand to use magisk):
adb shell su dd if=/dev/block/by-name/super of=/sdcard/super.img exit exit adb pull /sdcard/super.img
Switch to slot b to boot and disable dtbo:
fastboot set_active b fastboot erase dtbo
Install pmbootstrap and execute:
pmbootstrap init
Compile the kernel and flash rootfs to the super partition:
pmbootstrap build linux-postmarketos-qcom-sm8250 pmbootstrap build device-xiaomi-elish pmbootstrap install pmbootstrap flasher flash_rootfs --partition super pmbootstrap flasher flash_kernel
SSH into the device (Full instructions):
ssh user@172.16.42.1
Issues
1. Since xiaomi elish's display is a TDDI(touch and display integration) lcd screen that panel need a init sequence to make touch sensing available.
no panel driver yet, so touchscreen driver is broken.
See also
Initial merge request: pmaports!2871 pmaports fork: [1]