Xiaomi POCO M2 Pro / Redmi Note 9S / Redmi Note 9 Pro / Redmi Note 9 Pro Max (xiaomi-miatoll)
Revision as of 14:35, 24 February 2022 by Ungeskriptet (talk | contribs) (Include all models and rename codename to miatoll)
USB Networking | |
---|---|
Flashing | |
Touchscreen | |
Display | |
WiFi | |
FDE | |
Mainline | |
Battery | |
3D Acceleration | |
Audio | |
Bluetooth | |
Camera | |
GPS | |
Mobile data | |
SMS | |
Calls | |
USB OTG | |
NFC | |
Accelerometer | |
---|---|
Magnetometer | |
Ambient Light | |
Proximity | |
Hall Effect | |
Ir TX | |
---|---|
TrustZone | |
Contents
Contributors
Users owning this device
How to enter flash mode
- Fastboot: Power on the device with both Power and Volume Down buttons.
- Recovery: Power on the device with both Power and Volume Up buttons.
EDL Mode
![]() |
Note: An authenticated Mi account for EDL flashing is required. |
To enter the EDL mode, disconnect the battery and short these two points while powering it on with USB. If lsusb -d 05c6:9008
shows you a device, you can let go of the short.
Installation
/* Not yet */