Xiaomi POCO M2 Pro / Redmi Note 9S / Redmi Note 9 Pro / Redmi Note 9 Pro Max / Redmi Note 10 Lite (xiaomi-miatoll)
Revision as of 10:25, 15 January 2022 by Ungeskriptet (talk | contribs) (→See also: Use Wikipedia template)
![]() Xiaomi Redmi Note 9 Pro | |
Manufacturer | Xiaomi |
---|---|
Name | Redmi Note 9 Pro |
Codename | xiaomi-joyeuse |
Released | 2020 |
Category | testing |
Original software | Android 10, MIUI 11 |
Hardware | |
Chipset | Qualcomm SM7125 Snapdragon 720G |
CPU | Octa-core (2x2.3 GHz Kryo 465 Gold & 6x1.8 GHz Kryo 465 Silver) |
GPU | Adreno 618 |
Display | 1080 x 2400 (IPS LCD, 6.67") |
Storage | 64/128 GB |
Memory | 6 GB |
Architecture | aarch64 |
This device is marked as not booting.
USB Networking | |
---|---|
Flashing | |
Touchscreen | |
Display | |
WiFi | |
FDE | |
Mainline | |
Battery | |
3D Acceleration | |
Audio | |
Bluetooth | |
Camera | |
GPS | |
Mobile data | |
SMS | |
Calls | |
USB OTG | |
NFC | |
Accelerometer | |
---|---|
Magnetometer | |
Ambient Light | |
Proximity | |
Hall Effect | |
Barometer | |
Power Sensor | |
Camera Flash | |
---|---|
Keyboard | |
Touchpad | |
USB-A | |
HDMI/DP | |
Ir TX | |
Ir RX | |
Stylus | |
Haptics | |
Ethernet | |
FOSS bootloader | |
Contents
Contributors
Users owning this device
How to enter flash mode
- Fastboot: Power on the device with both Power and Volume Down buttons.
- Recovery: Power on the device with both Power and Volume Up buttons.
EDL Mode
![]() |
Note: An authenticated Mi account for EDL flashing is required. |
To enter the EDL mode, disconnect the battery and short these two points while powering it on with USB. If lsusb -d 05c6:9008
shows you a device, you can let go of the short.
Installation
/* Not yet */