Xiaomi Redmi 1S (xiaomi-armani)
Jump to navigation
Jump to search
USB Networking |
Works |
---|---|
Flashing |
Works |
Touchscreen |
Works |
Display |
Works |
WiFi |
Works |
Xwayland |
Works |
FDE | |
Mainline | |
Battery | |
3D Acceleration | |
Accelerometer | |
Audio | |
Bluetooth | |
Camera | |
GPS | |
Mobile data | |
SMS | |
Calls | |
USB OTG | |
Contents
Contributors
- alive4ever
What works
- USB ethernet
- Flashing, via android-recovery-zip (twrp) and pmbootstrap flasher
- Touchscreen (ft5x06_i2c)
- Screen: framebuffer (/dev/fb0), backlight & brigtness control (/sys/class/leds/wled:backlight/brightness)
- Notification leds (/sys/class/leds/red/brigtness, /sys/class/leds/green/brightness, /sys/class/leds/blue/brightness)
- Wifi: via wcnss-wlan and wlanarmani service (which does modprobe wlan on system boot after wcnss-wlan service has been initialized)
- Xwayland
- Battery: charging status (/sys/class/power_supply/battery/status), capacity reporting (/sys/class/power_supply/battery/capacity)
- Buttons: KEY_POWER, KEY_VOLUMEUP, and KEY_VOLUMEDOWN (triggerhappy can be used to handle them, see Troubleshooting:HID_buttons)
What does not work
- Screen: framebuffer console (no kernel boot log printed on the display), directfb applications (osk-sdl and charging-sdl)
- Wifi: rfkill (no support for blocking wireless via rfkill block wifi or nmcli radio wifi off). The only way to block wireless is unloading wlan module (``rmmod wlan`` or ``/etc/init.d/wlanarmani stop``)
- Sound: don't know how to initialize the sound card
- Other hardware features are untested (3D, bluetooth, modem, gps, accelerometer)
- Xorg based UI: postmarketos-ui-xfce4 displays nothing on the screen.
How to enter flash mode
- Entering fastboot: hold VolumeKeyDown + Power buttons until fastboot mode displayed on the screen.
- Entering recovery: hold VolumeKeyUp + Power buttons. The default is Mi Recovery. TWRP is needed for installation, which can be obtained here
Installation
pmbootstrap flasher method
- Put the device into fastboot mode by holding both VolumeKeyDown + Power buttons or rebooting into bootloader from the twrp reboot menu.
- Connect the device to the computer via usb cable
- Bootstrap PostmarketOS
$ pmbootstrap init #select xiaomi-armani
$ pmbootstrap install
- Flash the kernel and system
$ pmbootstrap flasher flash_kernel
$ pmbootstrap flasher flash_rootfs
- Reboot the device
$ fastboot reboot
Android recovery.zip sideload method
- Put the device into TWRP recovery, either by booting twrp image via fastboot directly or by pressing VolumeKeyUp + Power button after flashing TWRP recovery image.
- Connect the device to the computer via usb cable
- Bootstrap PostmarketOS
$ pmbootstrap init #select xiaomi-armani
$ pmbootstrap install --android-recovery-zip
$ pmbootstrap export # generate symlinks inside /tmp/postmarketOS-export directory
- Put the twrp recovery into sideload mode
$ adb shell "twrp sideload"
- Start sideloading the recovery file
$ adb sideload /tmp/postmarketOS-export/pmos-xiaomi-armani.zip
- Reboot the device
$ adb reboot
Additional info
It's necessary to unplug the usb cable after issuing ``poweroff`` command to properly shut down PostmarketOS.
Don't leave screen on for a long time, otherwise there will be LED burn-in. If the display screen is not used, turn the screen off.
$ echo 0 | sudo tee "/sys/class/leds/wled:backlight/brightness"
The screen can be turned on with maximum value up to 4095
$ echo 3072 | sudo tee "/sys/class/leds/wled:backlight/brightness"
Battery state can be monitored. Refer to Battery capacity monitoring for more information.
Hardware enablement effort
- Framebuffer: directfb based applications don't work (osk-sdl and charging sdl)
- Sound: unable to initialize the sound card on PmOS
See also
- #1204 Initial pull request