Xunlong Orange Pi PC (xunlong-orangepi-pc)

From postmarketOS
Revision as of 20:53, 29 January 2023 by SoySoy (talk | contribs) (type = Single Board Computer)
Jump to navigation Jump to search
Xunlong Orange Pi PC
Orange Pi PC
Orange Pi PC
Manufacturer Xunlong
Name Orange Pi PC
Codename xunlong-orangepi-pc
Released 2015
Category testing
Original version Linux 3.4
postmarketOS kernel Mainline
Hardware
Chipset Allwinner H3
CPU 4x 1.296 GHz ARM Cortex-A7
GPU Mali 400 MP2 600 MHz
Display HDMI port,CVBS out via 3.5mm jack
Storage microSD
Memory 1 GiB
Architecture armv7
Type Single Board Computer
Unixbench Whet/Dhry score 746.3
Features
USB Networking
Unavailable
Flashing
Unavailable
Touchscreen
Unavailable
Display
Works
WiFi
Unavailable
FDE
Mainline
Works
Battery
Unavailable
3D Acceleration
Works
Audio
Bluetooth
Unavailable
Camera
Unavailable
GPS
Unavailable
Mobile data
Unavailable
SMS
Unavailable
Calls
Unavailable
USB OTG
Works
NFC
Unavailable
Sensors
Accelerometer
Unavailable
Magnetometer
Ambient Light
Proximity
Hall Effect
Barometer
Power Sensor
Misc
Camera Flash
Keyboard
Unavailable
Touchpad
Unavailable
USB-A
Works
HDMI/DP
Works
Ir TX
Unavailable
Ir RX
Stylus
Haptics
Ethernet
FOSS bootloader
Works
U-Boot
Primary Bootloader
Works
Secondary Bootloader
Unavailable
Mainline
Works
Internal Storage
SD card
Works
USB Host
USB Peripheral
Display
Keyboard
Buttons
Unavailable




Contributors

Maintainer(s)

Users owning this device


Installation

Follow the Installation_guide, use sdcard method. Then insert microSD into TF-card slot and plug the power cable, pmOS should boot.

Variants

Not tested.

The Orange Pi PC Plus adds 8GB eMMC and Realtek RTL8189FTV SDIO-based WiFi directly on the board (as opposed to a soldered-on module). The physical dimensions and position of connectors are exactly the same as the Orange Pi PC. The same type of DRAM is used but tracing is different since one DRAM module moved to the bottom side of the PCB. Since a FEL button is missing on this board it's not that easy to verify DRAM reliability the usual way (through FEL boot) so we should stay with the failsafe value of 624 MHz DRAM clock. Regarding software support we can base on fex file and device tree for the PC and simply add the necessary WiFi chip mappings(There are a device tree for Orange Pi PC plus in the mainline kernel.)

See also