ASUS Chromebook CM30 Detachable (CM3001) (google-starmie)
Appearance
| This device is supported as part of a generic port. Refer to Google Corsola Chromebook (google-corsola) for installation instructions and more information. |
| Manufacturer | Asus |
|---|---|
| Name | Chromebook CM30 Detachable |
| Codename | google-starmie |
| Model | CM3001DM2A-R70011 / CM3001DM2A-R70171 / CM3001DM2A-R70001 / CM3001DM2A-R70008 / CM3001DM2A-R70006 |
| Released | 2023, 2024 |
| Pre-released | 2023 |
| Type | detachable |
| Hardware | |
| Chipset | MediaTek MT8186 |
| CPU |
2x Cortex-A76 6x Cortex-A55 |
| GPU | Mali-G52@MC2 |
| Display | 1920 x 1200 |
| Storage | 64/128 GB |
| Memory | 4/8 GB |
| Architecture | aarch64 |
| Write-Protect type | Ti50 |
| Software | |
Original software The software and version the device was shipped with. |
ChromeOS |
Extended version The most recent supported version from the manufacturer. |
ChromeOS |
| postmarketOS | |
| Category | community |
Pre-built images Whether pre-built images are available from the postmarketOS Installation page. |
yes |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
yes |
pmOS kernel The kernel version that runs on the device's port. |
6.18.28 |
| Generic port | Google Corsola Chromebook (google-corsola) |
| Device package |
|
| Kernel package |
|
Initial MR Initial merge request. |
pmaports!8763, pmaports!8777 |
Flashing Whether it is possible to flash the device with pmbootstrap flasher. |
Untested
|
|---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Untested
|
Internal storage eMMC, SD cards, UFS... |
Works
|
Battery Whether charging and battery level reporting work. |
Works
|
Screen Whether the display works; ideally with sleep mode and brightness control. |
Works
|
Touchscreen |
Works
|
Keyboard Whether the built-in physical keyboard works. |
Untested
|
Touchpad Whether the built-in touchpad works. |
Untested
|
Stylus |
Works
|
| Multimedia | |
3D Acceleration |
Untested
|
Audio Audio playback, microphone, headset and buttons. |
Works
|
Camera |
Works
|
| Connectivity | |
WiFi |
Works
|
Bluetooth |
Works
|
GPS |
Untested
|
| Modem | |
Calls |
Untested
|
SMS |
Untested
|
Mobile data |
Untested
|
| Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Works
|
USB OTG USB On-The-Go or USB-C Role switching. |
Works
|
HDMI/DP Video and audio output with HDMI or DisplayPort. |
Untested
|
| Sensors | |
Accelerometer Handles automatic screen rotation in many interfaces. |
Partial
|
Magnetometer Sensor to measure the Earth's magnetism |
Untested
|
Ambient Light Measures the light level; used for automatic screen dimming in many interfaces. |
Untested
|
Proximity |
Untested
|
Hall Effect Measures magnetic fields; usually used as a flip cover sensor |
Broken
|
Haptics |
Untested
|
Barometer Sensor to measure air pressure |
Untested
|
Power Sensor Sensor to monitor current, voltage and power. Not fuel gauge! |
Untested
|
Contributors
Users owning this device
- Akku (Notes: CM3001DM2A-R70006, starmie-rev3, 8GB/128GB (note: use
futility flash --wp-disableinsted offlashrom --wp-disable), broken keyboard/touchpad)
Hardware
Camera
Both front and rear cameras are internally connected via USB.
Suspend
Broken, power LED is always on and doesn't transition to flashing.
HDMI/DP
USB Type-C port supports DisplayPort Alt mode.
Accelerometer
Rotated 90 degrees off, apply this udev rule to fix.
SUBSYSTEM=="iio", ENV{ACCEL_MOUNT_MATRIX}="0, 1, 0; -1, 0, 0; 0, 0, 1"
How to enter flash mode
| Add step-by-step instructions for enabling flash mode. |