Anbernic RG35XX SP (anbernic-rg35xx-sp)
Appearance
This device has been tested with postmarketOS, but its device package has not yet been added to the postmarketOS repositories. This means that it cannot be selected in pmbootstrap. |
![]() Plasma Mobile on postmarketOS on the RG35XX SP | |
Manufacturer | Anbernic |
---|---|
Name | RG35XX SP |
Codename | anbernic-rg35xx-sp |
Released | 2024 |
Type | handheld |
Hardware | |
Chipset | Allwinner H700 |
CPU | 4x 1.5GHz Cortex-A53 |
GPU | Mali-G31 MP2 |
Display | 640x480 IPS @ 60Hz, 4:3, 3.5" |
Memory | 1GB LPDDR4 |
Architecture | aarch64 |
Software | |
Original software The software and version the device was shipped with. |
Linux Kernel 4.9 |
Extended version The most recent supported version from the manufacturer. |
Linux |
postmarketOS | |
Pre-built images Whether pre-built images are available here. |
no |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
pmOS kernel The kernel version that runs on the device's port. |
6.15.12 |
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
---|---|
SD card Also includes other external storage cards |
Works
|
Battery Charging and battery level reporting works |
Works
|
Screen Display works. Ideally with sleep mode and brightness control. |
Works
|
Multimedia | |
3D Acceleration |
Works
|
Audio Audio playback, microphone, headset and buttons. |
Partial
|
Connectivity | |
WiFi |
Works
|
Bluetooth |
Works
|
Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
USB OTG USB On-The-Go or USB-C Role switching |
Works
|
HDMI/DP Video and audio output with HDMI or Display Port works. |
Broken
|
Sensors | |
Hall Effect Also known as flip cover sensor |
Broken
|
Haptics |
Untested
|
Power Sensor Sensor to monitor current, voltage and power. Not fuel gauge! |
Untested
|
Contributors
Users owning this device
How to enter flash mode
The RG35XX SP boots from the OS stored on the microSD in first slot, labelled "TF/INT".
Installation
Using pmbootstrap
Follow Installation/Using pmbootstrap. When asked for the device's vendor/codename, select anbernic
as the vendor and rg35xx-sp
as the codename.
To flash the image to the device:
- Flash the image to a microSD and insert it into the first slot. (
pmbootstrap install --sdcard=/dev/sdX
)
As the RG35XX SP only has 1GB of RAM, it is highly recommended to setup a Swapfile to have a usable experience.
See also
- Scratchpad
- pmaports!6785 Initial merge request
- Anbernic product page