Apple iPad Air 2 (apple-j82)
Appearance
	
	
(Redirected from Apple iPad Air 2 (apple-ipad5,3))
A mainline fork for this device is available here with further instructions here. Still needs to be tested and ported to postmarketOS.
| This device is marked as not booting. Status: does not boot | 
| iPad Air 2 iPad Air 2 | |
| Manufacturer | Apple | 
|---|---|
| Name | iPad Air 2 | 
| Codename | apple-j82 | 
| Released | 2014 | 
| Type | tablet | 
| Hardware | |
| Chipset | Apple A8X | 
| CPU | 3x Apple Typhoon@1.5GHz | 
| GPU | PowerVR GXA6850 | 
| Display | 2048x1536 | 
| Storage | 32GB | 
| Memory | 2GB | 
| Architecture | aarch64 | 
| Software | |
| Original software The software and version the device was shipped with. | iOS 8 | 
| Extended version The most recent supported version from the manufacturer. | iOS | 
| postmarketOS | |
| Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. | no | 
| Unixbench score Unixbench Whetstone/Dhrystone score. See Unixbench. | 2904.0 | 
Contributors
- nergzd723
Users owning this device
How to enter flash mode
Plug in the cable, hold Power and Home key for 2-4 seconds for device to power off completely, so the backlight is dimmed, then release the Power key and continue holding the Home key for 8 seconds until you get a new DFU device. Run checkra1n.