EEBBK S5(eebbk-h7000)
Appearance
| This device has been tested with postmarketOS, but its device package has not yet been added to the postmarketOS repositories. This means that it cannot be selected in pmbootstrap. Status: booting |
|
EEBBK S5 Running gnome desktop | |
| Manufacturer | EEBBK |
|---|---|
| Name | S5 |
| Codename | eebbk-h7000 |
| Released | 2019 |
| Type | tablet |
| Hardware | |
| Chipset | Qualcomm Snapdragon 660 (SDM660) |
| CPU |
4x Qualcomm Kryo 260 Silver @ 1.8GHz 4x Qualcomm Kryo 260 Gold @ 2.2GHz |
| GPU | Adreno 512 |
| Display | 2176x1600 |
| Storage | 64GB/128GB |
| Memory | 4GB |
| Architecture | aarch64 |
| Software | |
Original software The software and version the device was shipped with. |
Android 9 |
Extended version The most recent supported version from the manufacturer. |
Android LineageOS18.1 |
| FOSS bootloader | partial |
| postmarketOS | |
| Category | testing |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
yes |
pmOS kernel The kernel version that runs on the device's port. |
7.0.9 |
Flashing Whether it is possible to flash the device with pmbootstrap flasher. |
Works
|
|---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Internal storage eMMC, SD cards, UFS... |
Works
|
Battery Whether charging and battery level reporting work. |
Works
|
Screen Whether the display works; ideally with sleep mode and brightness control. |
Works
|
Touchscreen |
Works
|
| Multimedia | |
3D Acceleration |
Works
|
Audio Audio playback, microphone, headset and buttons. |
Broken
|
Camera |
Broken
|
Camera Flash |
Works
|
| Connectivity | |
WiFi |
Works
|
Bluetooth |
Works
|
| Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Works
|
USB OTG USB On-The-Go or USB-C Role switching. |
Works
|
| Sensors | |
Magnetometer Sensor to measure the Earth's magnetism |
Broken
|
Ambient Light Measures the light level; used for automatic screen dimming in many interfaces. |
Broken
|
Proximity |
Broken
|
Hall Effect Measures magnetic fields; usually used as a flip cover sensor |
Broken
|
Primary Bootloader Whether it is possible to replace stock bootloader with U-Boot. |
Broken
|
|---|---|
Secondary Bootloader Whether it is possible to chainload U-Boot from stock bootloader. |
Works
|
Mainline Whether latest upstream versions of U-Boot are not broken and it is possible to use them. |
Partial
|
USB Host Whether it is possible to boot from a USB storage or connect a keyboard. |
Broken
|
USB Peripheral Whether it is possible to use device as a peripheral in U-Boot, e.g. for fastboot mode. |
Works
|
Display |
Works
|
| This device is based on the Snapdragon 660. See the SoC page for common tips, guides and troubleshooting steps |
Contributors
Problems
No audio driver
Mainline status
Device feature table:
| Component | Model | Status | Notes |
|---|---|---|---|
| Display | BOE TV110XUM-LB0-1SP0 | Y | Dual DSI |
| Backlight | KTZ8864 | N | |
| Display Pmic | TI TPS65132 | N | |
| Touchscreen | FT8201AB | Y | |
| Audio | TFA9891 | N | 2x Speaker Amp, one for each speaker |
| ? | N | Microphone audio ADC | |
| DSP Group DBMD4A | N | Voice processor, I2S | |
| Charging | PM660 | Y | |
| Buttons | GPIO | Y | |
| Micro-USB | USB 2.0 | Y | |
| Role switching | Y | ||
| VBUS out | Y | ||
| Wi-Fi & Bluetooth | wcn3990 | Y |
Additional info
EDL Test Pointer, Debug UART