Google Pixel Tablet (Tangorpro)
| This device is marked as not booting. Status: Research stage. Raw dump and live DTB extraction completed; no published postmarketOS device package yet. |
|
Front view of the Google Pixel Tablet | |
| Manufacturer | |
|---|---|
| Name | Pixel Tablet |
| Codename | google-tangorpro |
| Model | GA06158-US (128 GB Wi-Fi), GA06159-US (256 GB Wi-Fi) |
| Released | 2023 |
| Type | tablet |
| Hardware | |
| Chipset | Google Tensor G2 |
| CPU |
2x 2.85 GHz Cortex-X1 2x 2.35 GHz Cortex-A78 4x 1.80 GHz Cortex-A55 |
| GPU | Mali-G710 MP7 |
| Display | 2560x1600 LCD, 16:10, 10.95" |
| Storage | 128 / 256 GB UFS 3.1 |
| Memory | 8 GB LPDDR5 |
| Architecture | aarch64 |
| Software | |
Original software The software and version the device was shipped with. |
Android 13 |
Extended version The most recent supported version from the manufacturer. |
Android |
| FOSS bootloader | no |
| postmarketOS | |
Pre-built images Whether pre-built images are available from the postmarketOS Installation page. |
no |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
yes |
Unixbench score Unixbench Whetstone/Dhrystone score. See Unixbench. |
0.0 |
The Google Pixel Tablet (codename tangorpro; page title style: google-tangorpro) is Google's 2023 tablet built on the Google Tensor G2 platform. It ships with Android and uses the same general SoC generation as the Pixel 7 family, but in a tablet form factor with a 10.95-inch 2560x1600 display, 8 GB of RAM, and 128 GB or 256 GB of UFS 3.1 storage.
This page is currently focused on early porting and documentation work for postmarketOS on tangorpro.
Contributors
Users owning this device
Current status
- raw dump completed
- live DTB extraction completed
- partition / firmware / boot-chain mapping in progress
- no published postmarketOS device package yet
Known variants
- GA06158-US — 128 GB Wi-Fi
- GA06159-US — 256 GB Wi-Fi
SoC / platform
The Pixel Tablet uses the Google Tensor G2 SoC.
CPU
- 2x 2.85 GHz Cortex-X1
- 2x 2.35 GHz Cortex-A78
- 4x 1.80 GHz Cortex-A55
GPU
- Mali-G710 MP7
How to enter flash mode
| These instructions apply to the standard Pixel fastboot / bootloader flow. |
- Power the device off completely.
- Hold Volume Down + Power until the fastboot screen appears.
- Alternatively, from Android with USB debugging enabled, run
adb reboot bootloader.
Installation
Current state
There is currently no merged or published postmarketOS device package for google-tangorpro. This page is being used to document the hardware platform and early bring-up work first.
Future pmbootstrap notes
Once a device package exists, the expected vendor/codename pairing would be:
- vendor:
Google - codename:
tangorpro
Notes
- The long-term goal is to move beyond dump-and-documentation work into actual device bring-up.
- Because this device is built on Tensor G2, progress here may also help inform future work around the broader Tensor G2 platform.