Jump to content

HTC One X+ (htc-endeavor-c2)

From postmarketOS Wiki
(Redirected from HTC One X+ (htc-enrc2b))
Note There are two variants available: An international one and AT&T variant
HTC One X+
First time pmos is booting.
First time pmos is booting.
Manufacturer HTC
Name One X+
Codename htc-endeavor-c2, htc-enrc2b
Released 2012
Type handset
Hardware
Chipset NVIDIA Tegra 3+ (AP37)
CPU Quad-core 1.7 GHz
GPU ULP GeForce 2
Display 720x1280 Color PVA TFT LCD
Storage 32/64GB
Memory 1 GB
Architecture armv7
Software
Original software
The software and version the device was shipped with.
Android (HTC Sense) 4.1.1 (Sense UI 4)
Extended version
The most recent supported version from the manufacturer.
Android (HTC Sense)
postmarketOS
Category downstream
Mainline
Instead of a Linux kernel fork, it is possible to run (Close to) Mainline.
no
pmOS kernel
The kernel version that runs on the device's port.
3.1.10
Device package htc-enrc2b device-htc-endeavor-c2, htc-enrc2b
Kernel package htc-enrc2b linux-htc-endeavor-c2, htc-enrc2b
Features
Flashing
It is possible to flash the device with pmbootstrap flasher.
Works
USB Networking
After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system).
Broken
Battery
Charging and battery level reporting works
Untested
Screen
Display works. Ideally with sleep mode and brightness control.
Works
Touchscreen
Untested
Multimedia
3D Acceleration
Untested
Audio
Audio playback, microphone, headset and buttons.
Untested
Camera
Untested
Connectivity
WiFi
Untested
Bluetooth
Untested
GPS
Untested
Modem
Calls
Untested
SMS
Untested
Mobile data
Untested
Miscellaneous
FDE
Full disk encryption and unlocking with unl0kr.
Untested
USB OTG
USB On-The-Go or USB-C Role switching
Untested
Sensors
Accelerometer
Auto screen rotation works in desktops e.g. Phosh or Plasma Mobile
Untested


How to enter HBOOT

Power+Volume Down

From here you can navigate to recovery or fastboot mode.

Installation

Note Sometimes it stucks at the htc logo. Rebooting solves the issue

Basically follow the Installation guide. Here is an overview about different options available:

Option Info Working
pmbootstrap flasher flash_rootfs Y
pmbootstrap flasher boot Y
pmbootstrap flasher flash_kernel Y
sd-card installation
Android-Recovery-Installer
Full-disk-encryption parameter N

USB-Network

Trying to get onto the device with ssh results in

ssh: connect to host 172.16.42.1 port 22: Connection timed out

Contributors

Maintainer

Users owning this device


See also