HTC One XL (htc-evita)
| This device has been archived. This means that it no longer appears in pmbootstrap and is likely broken. It can still be selected in pmbootstrap init by typing in the vendor and codename, but you will have to build the kernel package manually. |
 HTC One XL running Weston demo | |
| Manufacturer | HTC |
|---|---|
| Name | One XL |
| Codename | htc-evita |
| Released | 2012 |
| Type | handset |
| Hardware | |
| Chipset | Qualcomm Snapdragon S4 Plus (MSM8960) |
| CPU | 1.5 GHz dual-core Qualcomm Krait |
| GPU | Qualcomm Adreno 225 |
| Display | 1280x720 S-LCD |
| Storage | 16GB/32GB |
| Memory | 1GB |
| Architecture | armv7 |
| Software | |
Original software  The software and version the device was shipped with. |
Android 4.0.3 |
Extended version The most recent supported version from the manufacturer. |
Android |
| postmarketOS | |
| Category | archived |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
| Device package |
 device-htc-evita |
| Kernel package |
linux-htc-evita |
Flashing Whether it is possible to flash the device with pmbootstrap flasher. |
Works
|
|---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Works
|
Battery Whether charging and battery level reporting work. |
Untested
|
Screen Whether the display works; ideally with sleep mode and brightness control. |
Works
|
Touchscreen |
Works
|
| Multimedia | |
3D Acceleration |
Untested
|
Audio Audio playback, microphone, headset and buttons. |
Untested
|
Camera |
Untested
|
| Connectivity | |
WiFi |
Untested
|
Bluetooth |
Untested
|
GPS |
Untested
|
| Modem | |
Calls |
Untested
|
SMS |
Untested
|
Mobile data |
Untested
|
| Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
| Sensors | |
Accelerometer Handles automatic screen rotation in many interfaces. |
Untested
|
Contributors
- sir_si
Device owners
How to enter flash mode
Hold the Volume Down button, and then press the Power button
Installation
- Unlock (s-off) the bootloader if it hasn't been unlocked before ([1] unlock site)
- Boot the device in HBOOT mode and select fastboot
- Flash pmOS using pmbootstrap flasher flash_rootfs
- Flash kernel using pmbootstrap flasher flash_kernel
Other
The workaround for the red scerren issue listed here does not seem to work on this device. Instead we need to change a Kernel configuration and disable CONFIG_FB_MSM_DEFAULT_DEPTH_RGBA8888 and enable CONFIG_FB_MSM_DEFAULT_DEPTH_RGB565=y
See also
- pmaports!175 initial MR