HTC Sensation (htc-pyramid)
Appearance
This device runs a Downstream kernel. Some UIs will not work, and most features (3D acceleration, audio, etc.) may be broken. |
![]() HTC Sensation | |
Manufacturer | HTC |
---|---|
Name | Sensation |
Codename | htc-pyramid |
Released | 2011 |
Type | handset |
Hardware | |
Chipset | Qualcomm Snapdragon S3 (MSM8260) |
CPU | Dual-core 1.2 GHz Scorpion |
GPU | Adreno 220 |
Display | 540x960 |
Storage | 1 GB |
Memory | 768 MB |
Architecture | armv7 |
Software | |
Original software The software and version the device was shipped with. |
Android 2.3.4 |
Extended version The most recent supported version from the manufacturer. |
Android 4.0 |
postmarketOS | |
Category | downstream |
Mainline Instead of a Linux kernel fork, it is possible to run (Close to) Mainline. |
no |
pmOS kernel The kernel version that runs on the device's port. |
3.4.107 |
Device package |
![]() |
Kernel package |
![]() |
Flashing It is possible to flash the device with pmbootstrap flasher . |
Works
|
---|---|
USB Networking After connecting the device with USB to your PC, you can connect to it via telnet (initramfs) or SSH (booted system). |
Untested
|
Battery Charging and battery level reporting works |
Untested
|
Screen Display works. Ideally with sleep mode and brightness control. |
Works
|
Touchscreen |
Untested
|
Multimedia | |
3D Acceleration |
Untested
|
Audio Audio playback, microphone, headset and buttons. |
Untested
|
Camera |
Untested
|
Connectivity | |
WiFi |
Untested
|
Bluetooth |
Untested
|
GPS |
Untested
|
Modem | |
Calls |
Untested
|
SMS |
Untested
|
Mobile data |
Untested
|
Miscellaneous | |
FDE Full disk encryption and unlocking with unl0kr. |
Untested
|
Sensors | |
Accelerometer Auto screen rotation works in desktops e.g. Phosh or Plasma Mobile |
Untested
|
Contributors
- onny
How to enter flash mode (HBOOT)
- Power off the phone
- Press
- Keep pressed, and press .
Installation
- Install everything using an SD card
pmbootstrap install --sdcard=/dev/sd?
- Insert the SD-Card on the device
- Boot the device in HBOOT mode and select fastboot (Make sure it says "FASTBOOT USB", not "HBOOT USB PLUG")
- Flash kernel using
pmbootstrap flasher flash_kernel
- Reboot
See also
- pmaports!2428 Initial merge request
- Device package
- Kernel package