Huawei Mediapad 10 Link+ (huawei-s10-231u)

From postmarketOS
Huawei Mediapad 10 Link+
Huawei Mediapad 10 Link+ running Android 4.2.2
Huawei Mediapad 10 Link+ running Android 4.2.2
Manufacturer Huawei
Name Mediapad 10 Link+
Codename huawei-s10-231u
Released 2014
Category none
Original software Android
Original version 4.2.2
Hardware
Chipset HiSilicon Kirin 910 (V9R1 / Hi6620)
CPU Quad-core 1.6 GHz Cortex-A9
GPU Mali-450 MP4
Display 1280x800
Storage 8/16 GB
Memory 1 GB
Architecture ARMv7
Type Tablet
This device is marked as not booting.
Features
USB Networking
Flashing
Touchscreen
Display
WiFi
FDE
Mainline
Broken
Battery
3D Acceleration
Audio
Bluetooth
Camera
GPS
Mobile data
Internal storage
SMS
Calls
USB OTG
Sensors
Accelerometer
Magnetometer
Ambient Light
Proximity
Hall Effect
Barometer
Power Sensor
Misc
Built-in DVB
Camera Flash
Keyboard
Touchpad
USB-A
HDMI/DP
Ir RX
Stylus
Memory Card
Haptics
Ethernet
FOSS bootloader


Contributors

  • Bastindo

Users owning this device

How to enter flash mode

  • Fastboot: Hold Power + Volume Down or enable USB debugging in Android and do adb reboot bootloader.
  • Bootloader is weird, it seems like it can be unlocked easily but my tablet semi-bricked itself after successfully booting a custom recovery. (Can still boot to unmodified Android system by using fastboot reboot, but it does not boot normally. Recovery doesn't boot at all.)

Installation

not yet

Mainline Kernel

See Huawei_Ascend_P7_(huawei-sophia)#Mainline_Kernel

See also